Reboot; Upgrade - Honeywell PERFORMANCE LITE 2MP SD User Manual

• Import & Export Settings
Configuration settings of the camera can be exported form a camera into another camera.
1. Click "Browse" to select the save path for import or export information on the PC.
2. Click the "Import Setting" or "Export Setting" button.
• Default Settings
Click the "Load Default" button to restore all system settings to the default factory settings except those you want to keep.

Reboot

Go to Config > Maintenance > Reboot.
Click the "Reboot" button to reboot the device.
Timed Reboot Setting:
If necessary, the camera can be set up to reboot on a time interval. Enable "Time Settings", set the date and time and then Click
the "Save" button to save the settings.

Upgrade

Go to Config > Maintenance > Upgrade. In this interface, the camera firmware can be updated.
1. Click the "Browse" button to select the save path of the upgrade file
2. Click the "Upgrade" button to start upgrading the firmware.
3. The device will restart automatically
Caution! Do not close the browser or disconnect the camera from the network during the upgrade.
Online upgrade (optional)
For some specified models, online upgrade is available. The setting steps are as follows. If no such function, please skip the
instructions.
1. Create the upgrade file location and save it.
2. Check the latest version by clicking "Check version".
Click "Upgrade" to update the firmware online.
Performance Lite 2MP SD Camera - User Manual | Configuration 31