• Check that the camera-recorder's power is on
before sliding the OPEN/EJECT lever.
• Close the cassette cover if you are not going to
insert a cassette tape immediately after removing
another.
• Do not attempt to remove a tape while you are
recording. The cassette cover opens but recording
will continue, allowing outside light and dust to
adversely affect the tape.
Turning off the power
POWER
Turn the POWER lever to the OFF position.
The power is now turned off, and the CAM lamp goes
off.
Disconnecting the power cord
O
P
1
Disconnect the AC cord from the power outlet.
2
Disconnect the DC cord from the DC input socket.
3
Disconnect the DC cord and AC cord from the AC
adapter.
• Turn the POWER lever to the OFF position, check
that the POWER lamp (CAM/VCR) has gone off,
and then remove the battery.
• Support the battery with your hand so that it does
not drop off.
CAM
VCR
P
N
ENGLISH
13 (E)