Maintenance; Environmental Protection; Technical Data - eta Liliana 1328 Instructions For Use Manual

Hair styling
Use the hot comb on dry or slightly moist hair, never on wet hair. Comb the hair before
using the comb so that they are not tousled. The ending A4 stays cold during operation
and allows hair styling with both hands. Fix a lock of hair of the moving clip A5 to the
heated-up tube A3. Move the hot comb to the end of the hair and then wind the lock in
a desired direction with several turns. Do not wind locks too thick on the tube when hair
styling. Let the heat affect the hair for several seconds then unwind the lock and release.
Repeat the process until the desired hairstyle is achieved. Let the hair cool down before
final styling.
Iv. MAINTENANCe
Turn off the appliance before any maintenance, disconnect it from power supply
by unplugging the power cord from the electric socket and let it cool down! Do not
use rough and aggressive detergents! Treat the surface with a wet and soft cloth. Put the
cooled straightener to a safe and dry place, out of reach of children and incapacitated
persons.
v. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at special collection places where they will be accepted free of
charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at the local waste collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations. If the appliance is
to be put out of operation for good, after disconnecting it from power supply we recommend
cutting off the power cord and thus it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by a professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
VI. TECHNICAL DATA
Voltage (V)
Input (W)
Weight about (kg)
Protection class of the appliance
Size of the product (mm)
The product has received ES declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
specified on the type label
specified on the type label
0,3
II.
347 x 70 x 52
15 / 26
GB