Related Manuals for Tequipment Prosaris OL1
Summary of Contents for Tequipment Prosaris OL1
- Page 1 User manual OL1 Ultrasonic Leak Detector © 2021 Prosaris Solutions Ltd. PRO-TEC-DOC-U0002-R02...
- Page 2 Limited warranty and limitation of liability UL Condition This Prosaris product will be free from defects in material The performance of the product, such as accuracy or and workmanship for one year from the date of purchase. functional safety, has not been evaluated and the product is This warranty does not cover fuses, batteries, or damage not intended to be used for life safety applications.
-
Page 3: Table Of Contents
Table of Contents Introduction 5.6 Home screen 5.7 Settings menu 1.1 Applications 5.8 Firmware updates How to contact Prosaris Leak Detection Before you start 6.1 Begin Leak Detection 6.2 Enter Leak Parameters 3.1 Package contents 6.3 Detection screen 3.2 Device overview 6.4 Detection settings 3.3 Terms to know 6.5 Begin detection... -
Page 4: Introduction
Introduction 1.1 Applications The Prosaris OL1 is a portable directional ultrasonic leak detector primarily used to detect, locate, and measure leaks The OL1’s main applications are: in compressed gas and vacuum systems. • Compressed air leak detection, location and The OL1 connects with any Android device and through an... -
Page 5: How To Contact Prosaris
How to contact Prosaris To contact Prosaris, use one of the following email addresses below or visit us at www.prosaris.ca. Tech Support: support@prosaris.ca Industry Sales: sales@prosaris.ca General Inquiries: info@prosaris.ca... -
Page 6: Before You Start
Before you start 3.1 Package contents Model Description Ultrasonic Leak Detector OL1 Soft Case Prosaris soft carrying case for the OL1 Charging Approved USB-C to USB-A Cable charging cable for the OL1 (45cm) OL1 Connecting Approved USB-C to microUSB Cable 1* cable connecting the OL1 device to your Android device OL1 Connecting... -
Page 7: Device Overview
Before you start 3.2 Device overview 1. Microphone array The OL1 has three arrays consisting of 8 MEMS microphones each, protected by a dust and water- resistant cover. Take care to prevent any object from coming in contact with these covers. 2. -
Page 8: Terms To Know
Before you start 3.3 Terms to know Use this section to familiarize yourself with the terms that are unique to the Prosaris OL1 device and signal strength measurements. Loss ($/year): The Prosaris Leak Management app Flow (m /hr or cfm): The Prosaris Leak Management app... -
Page 9: Safety
• Do not put the device near heat or fire. • Always operate in the specified temperature range. • Do not incinerate the Prosaris OL1 and/or battery. • Do not store the device on the charger for more than 24 hours as •... - Page 10 Before you start CAUTION The OL1 uses a magnet to attach to your device. Please take care of the following recommendations: • Do not place the OL1 device near any sensitive magnetic media such as computer disks, credit cards and tapes. •...
-
Page 11: Initial Setup
Initial setup 4.1 Charge the device 4.2 Download the app The OL1 ships with limited charge to preserve battery life. The Prosaris Leak Management app is required to operate Before your first use, fully charge the battery by leaving it the OL1 and is available on the Google Play store. -
Page 12: Affix The Mounting Plate
Initial setup 4.3 Affix the Mounting Plate To attach the OL1 magnetically to your device, you must first affix the Mounting Plate. Affix the Mounting Plate in the center of the back surface of the device where possible, without obscuring the device’s camera. -
Page 13: Basic Operation
Basic Operation 5.1 Attach the OL1 5.2 Connect the OL1 The OL1 attaches magnetically to your device via the Connect your tablet to the OL1 via the included cable. included Mounting Plate. Depending on your device, you may have to use a different cable. -
Page 14: Launch The App
Basic operation 5.3 Launch the app 5.4 Registration The Prosaris Leak Management app enables the If you do not have an account, tap “Register” to be guided functionality of your OL1 device. After installing the app, through the account registration process. You will be asked you can launch the app by tapping on the icon on your to provide your name and email, as well as other pieces Android device’s home screen. -
Page 15: Home Screen
Basic operation 5.6 Home screen 5.7 Settings menu Now that you have logged in, every time you reopen the app This “Settings” menu contains key information about your you start from the above “Home Screen”, until you decide to Prosaris app and device, as well as the information about log out. -
Page 16: Firmware Updates
Basic operation 5.8 Firmware updates The functionality of your device can be improved by upgrading its embedded software, or firmware. Firmware updates will be periodically pushed to your device through the app. If a new firmware version is available and you’re connected to the Internet, your app will automatically download and apply the update. -
Page 17: Leak Detection
Leak Detection 6.1 Begin Leak Detection 6.2 Enter Leak Parameters To start finding your leaks, tap “FIND A LEAK”. The app will take you to the “Leak Data Input” screen which allows you to pre-populate leak parameters which are critical to quantifying the size and impact of the leak. Use “Flow”... -
Page 18: Detection Screen
Leak detection 6.3 Detection screen 6.4 Detection settings The Detection screen displays key information. To get the most accurate readings for your environment, you can adjust your detection settings. dB peak and dB current measure signal strength at the point of detection. -
Page 19: Begin Detection
Leak detection 6.5 Begin detection 6.6 Leak direction Tap the “Start” button to begin leak detection. When a leak is detected and located, an arrow will appear with the direction of the leak location Your device will start searching for a leak by listening for the ultrasonic noise that a leak emits. -
Page 20: Getting On-Target
Leak detection 6.7 Getting on-target Your OL1 and app work together automatically to provide When you are on-target, three arrows will appear to confidence that the leak is in view and on target. help you center the leak source in the circle. Enter your approximate distance from the leak for the most accurate When the leak is in view, the arrow will move to the inside readings. -
Page 21: Finish Leak Detection
Leak detection 6.8 Finish leak detection When confident you have located and quantified the leak, If you have a Premium or Enterprise subscription, you confirm your distance from the leak and tap the check can take a photo of the leak to reference later. Drag the button to finish leak detection. -
Page 22: Leak Management
Leak Management 7.1 Creating leak records “Leak Parameters” Record characteristics of the leak and/or adjust characteristics to refine quantification. “Leak Source” Provides equipment and component details. Use the “Equipment Tag” field to recognize and input equipment tag IDs. Use the two photo fields to capture both a close-up of the leak source, as well as a location reference to aid later action/resolution. -
Page 23: Viewing Leak Records
Leak management 7.2 Viewing leak records 7.3 Editing leak records After saving the leak record, you can view all your other To edit a record, first select the record you wish to edit from saved records. You can also access your records from the the “View Records”... -
Page 24: Leak Management Dashboard
Leak management 7.4 Leak management dashboard For Premium and Enterprise users, you can access your Prosaris Leak Management dashboard by going to https:// dashboard.prosaris.ca and logging in with the same email and password you use to log in to the Prosaris Leak Management app. -
Page 25: Specifications
Specifications For complete and up-to-date device specifications, visit www.prosaris.ca. - Page 26 www.prosaris.ca support@prosaris.ca © 2021 Prosaris Solutions Ltd PRO-TEC-DOC-U0002-R02...
Need help?
Do you have a question about the Prosaris OL1 and is the answer not in the manual?
Questions and answers