H3C MSR800 Installation, Quick Start

H3C MSR800 Routers Installation Quick Start-6PW103
H3C MSR800路由器 快速安装指南-6PW103
Tool List 工具参考
The installation tools are not provided with the device. Prepare them yourself.
设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Flathead screwdriver Phillips screwdriver
一字螺丝刀 十字螺丝刀
Diagonal pliers ESD-preventive wrist strap
斜口钳 防静电腕带
Introduction to Installation Accessories 安装附件介绍
Ring terminal Mounting bracket
接地端子 挂耳
Cage nut
Screw and anchor kit
(user supplied)
( User supplied )
浮动螺母（用户自备）
螺钉和安装导管(用户自备)
Wear an ESD wrist strap, and make sure the wrist strap has a Good skin contact and is well grounded.
!
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良好接地。
Needle-nose pliers Wire-stripping pliers Claw hammer
尖嘴钳 剥线钳
Drill Blow dryer
电钻 热吹风
Grounding screw Rubber pads WIFI antenna
接地螺钉 脚垫
M6 screw M4 countersunk-head
(user supplied)
M6 螺钉（用户自备） M4 沉头螺钉
Mounting the Router on a Workbench 安装路由器到工作台
Stick the rubber pads to the appropriate
positions on the router bottom
将脚垫粘贴到路由器底部
羊角锤
Wall Mounting 壁挂安装
Marker
记号笔
1
WIFI天线
screw
5
When you mount the router on a wall, position the router so the Ethernet ports face downwards, and the
!
sides with ventilation openings are perpendicular to the ground.
安装时请将设备的以太网口朝下，设备带通风孔的两个侧面与地平面垂直。
≥ 22 mm(0.87in)
2
≥ 1.5 mm
(0.06in)
3 4
6