Wiring The Power Inputs - Korenix JetNet 3810G Series User Manual

2.2 Wiring the Power Inputs

JetNet 3810G(f)/3806G is a specific surveillance system used in vehicles. It accepts
12~24V DC power input and boosts to 48V DC output for 802.3af standard PoE
devices.
JetNet 3710G without power boosting function accepts only 48V DC power Input.
IMPORTANT: Do make sure that different models must connect to the corresponding
supply voltage. Guarantee will not apply to the damage caused by wrong input
power.
1. Insert the positive and negative wires of your DC supply into the V+ and V-
contacts of the terminal block connector. The acceptable wire range is 12 to 24 AWG.
JetNet 3810G(f)/ 3806G
Korenix 11
JetNet 3810G(f)/ 3806G/ 3710G