1. Manuals
  2. Brands
  3. Stryker Medical Manuals
  4. Medical Equipment
  5. Venture Series
  6. Maintenance manual

Stryker Medical Venture Series Maintenance Manual

Emergency care stretcher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Venture Series
350/351 Emergency Care Stretcher
360/361 PACU Stretcher
Maintenance Manual
For Parts or Technical Assistance
800–327–0770

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Venture Series and is the answer not in the manual?

Questions and answers

Related Manuals for Stryker Medical Venture Series

Summary of Contents for Stryker Medical Venture Series

  • Page 1 Venture Series 350/351 Emergency Care Stretcher 360/361 PACU Stretcher Maintenance Manual For Parts or Technical Assistance 800–327–0770...

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ............... . Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings and Parts Lists (Continued) Tethered I.V. Pole Assembly ............. Oxygen Bottle Holder Assembly .

  • Page 4: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the Model 360 and 361 Stretchers. Read it thoroughly before using the equipment or beginning any maintenance on it. SPECIFICATIONS Maximum Weight Capacity 500 pounds Overall Stretcher Length \ Width 79”...

  • Page 5: Preventative Maintenance

    Preventative Maintenance CHECKLIST (PERFORM MINIMUM OF TWICE A YEAR) All fasteners secure (reference all assembly prints) Siderails move and latch properly (page 5) All casters lock with brake pedal engaged (page 14) Steer function working properly All casters secure and swivel properly (page 7) Body restraints working properly I.V.

  • Page 6: Cleaning

    Cleaning Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate. (Ap- propriate disinfectant for nylon Velcro should be determined by the hospital.) In general, when used in those concentrations recommended by the manufacturer, either phenolic type or quaternary type disinfectants can be used with Staph–Chek fabrics.
  • Page 7 Notes...

  • Page 8: Service Information

    Service Information PNEUMATIC FOWLER ADJUSTMENT Required Tools: 3/32” Hex Allen Wrench 9/16” Box End Wrench 5/16” Hex Allen Wrench Adjustment Procedure: 1. Refer to drawing 360–31–10 (Pneumatic Fowler Assembly, page 35) for part reference. 2. For easier access, raise Fowler to 90_. 3.

  • Page 9: Base Pedal Linkage Adjustment

    Service Information BASE PEDAL LINKAGE ADJUSTMENT Required Tools: 3/32 Hex Allen Wrench 7/16 Open End Wrench 1/2 Open End Wrench Bungee Cords Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base hood.

  • Page 10: Caster Assembly Replacement

    Service Information CASTER ASSEMBLY REPLACEMENT* Required Tools: 1/8 Roll Pin Punch Drill with 1/8 inch Drill Bit Flat Punch (any size larger than 1/8) Hammer Needle Nose Pliers Floor Jack 3/4 Inch Wrench Bungee Cords 1 Inch Wrench Torque Wrench (w/ Ft. Lbs. Adjust.) Replacement Procedure: 1.
  • Page 11 Service Information CASTER MAINTENANCE Required Tools: 5/8” Wrench 11/16” Wrench Maintenance Procedure: 1. Remove the plastic caster cover (see page 8). 2. Using the 5/8” wrench and the 11/16” wrench, remove the centerlock nut (item A) from the through bolt (item B) for the caster wheel.
  • Page 12 Notes...

  • Page 13: Caster Cover Installation And Removal

    Service Information CASTER COVER INSTALLATION AND REMOVAL Looking through the larger of the two side cut–outs, align cover with axle nut or bolt head, as shown. Double Prongs Push down on the opposite side of the cover until single prong engages with caster horn. Single Prong Top View (Cut–Away) Properly Attached...

  • Page 14: Hydraulic System Troubleshooting

    Service Information HYDRAULIC SYSTEM TROUBLESHOOTING NOTE Be sure the pedal linkage has been adjusted properly before beginning service on the jacks (see page 6). PROBLEM/SYMPTOM SOLUTION Jack will not raise to full height. Add hydraulic fluid (see p. 10). Check for leaks. Jack will not hold in raised position.

  • Page 15: Checking Hydraulic Fluid Level

    Service Information CHECKING HYDRAULIC FLUID LEVEL Required Tools: 3/8 Open End Wrench 3/4 Open End Wrench Procedure: WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning service on the jacks. 1.

  • Page 16: Brake Ring Replacement

    Service Information BRAKE RING REPLACEMENT Brake Ring Part Number 715–1–61 Required Tools: Phillips Screwdriver String or Bungee Cord Floor Jack, Small Crate (or equiv.) Large Standard Screwdriver 3/32” Allen Wrench 11/16” Socket & Ratchet 5/8” Wrench Needle–Nose Pliers (2) 7/16” Wrenches Procedure: 1.

  • Page 17: Hydraulic Check Valve Replacement

    Service Information HYDRAULIC CHECK VALVE REPLACEMENT Required Tools: 3/8 Open End Wrench Stiff Wire (with bent, pointed end) Small Needle Nose Pliers 3/4 Open End Wrench Torque Wrench (with Ft. Lbs. adjust.) 7/32 Hex Allen Wrench 1/2 Inch Diameter Rod Replacement of Valve #1 WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning...

  • Page 18: Replacement Of Valve #2

    Service Information HYDRAULIC CHECK VALVE REPLACEMENT (CONTINUED) Replacement of Valve #2 WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the jack.

  • Page 19: Brake Adjustment

    Service Information BRAKE ADJUSTMENT Required Tools: 3/32” Hex Allen Wrench Pry Bar Thread ”Locktite” BASE LUBRICATION POINTS 1. Lubricate brake adjuster rod around area shown with MPG–2 grease or equivalent. Do not grease area shown.

  • Page 20: Replacement Part Numbers

    Replacement Part Numbers PART NAME PART NUMBER 3” Low Friction Mattress (26” wide) ....... . . 1059–326–40 4”...

  • Page 21: Side Control Base Assembly (With Wheels & Brakes)

    Side Control Base Assembly (With Wheels & Brakes)
  • Page 22 Side Control Base Assembly (With Wheels & Brakes) Item Part No. Part Name Qty. 715–1–245 Base Weldment Assembly 38–211 Spring 715–1–158 Caster Nut 715–1–61 Caster Brake Assembly (Page 18) Brake Adjuster Assembly 715–1–231 Brake/Steering Rod Assembly 1000–10–62 Steering Lock Linkage Bar (Page 19) Brake Cam Assembly 715–1–94...

  • Page 23: Brake Adjuster Assembly

    Brake Adjuster Assembly Assembly part number 715–1–150 Item Part No. Part Name Qty. 715–1–62 Threaded Stud Assembly 14–4 Nylon Washer 715–1–180 Bearing 28–8 Retaining Ring...

  • Page 24: Brake Cam Assembly

    Brake Cam Assembly Assembly part number 715–1–213 Item Part No. Part Name Qty. 715–1–221 Brake Cam 16–59 Fiberlock Nut 8–21 Soc. Hd. Cap Screw 715–1–173 Brake Connecting Link...

  • Page 25: Caster Assembly With Steerlock

    Caster Assembly with Steerlock Assembly part number 715–2–21 Item Part No. Part Name Qty. 700–10–50 Steer Lock Caster Weldment 715–2–25 Caster Wheel 16–60 Hex Nut 3–99 Hex Bolt 715–3–96 Hex Bolt 1000–59–10 Latch Assembly 11–310 Flat Washer...

  • Page 26: Caster And Caster Cover Replacement Kits

    Caster and Caster Cover Replacement Kits Item Part No. Part Name Qty. 715–2–20 Caster Assembly 715–1–266 Caster Cover, Left 715–1–265 Caster Cover, Right P/N 715–259–400 – Kit to replace 4 standard caster assemblies with necessary hardware – no caster covers. P/N 715–269–400 –...
  • Page 27 715–1–25 Fifth Wheel Assembly Item Part No. Part Name Qty. 715–1–339 Fifth Wheel Pivot Assembly 715–1–17 Fifth Wheel Bushing 16–11 Flexlock Nut 715–1–15 Spring 715–1–13 Fifth Wheel Bracket 16–12 Flexlock Nut 390–1–54 Wheel 3–31 Hex Head Cap Screw 3–82 Hex Head Cap Screw 21.1...
  • Page 28 Notes 21.2...
  • Page 29 Assembly part number 360–45–10...

  • Page 30: Base Assembly (With Jacks)

    Base Assembly (with Jacks) Item Part No. Part Name Qty. 29–7 Dual Lock (page 24) Jack Assembly 11–262 Flat Washer 3–62 Hex Hd. Cap Screw 11–3 Flat Washer 16–36 Nylock Hex Nut 715–1–192 Jack Support 3–85 Hex Hd. Cap Screw 715–1–193 Jack Support Clamp 13–38...
  • Page 31 Side Control Base Assembly (With Jacks) 23.1...
  • Page 32 Side Control Base Assembly (With Jacks) Item Part No. Part Name Qty. 3–47 Hex Hd. Cap Screw 3–62 Hex Hd. Cap Screw 3–85 Hex Hd. Cap Screw 4–146 Soc. Hd. Cap Screw 11–3 Washer 11–4 Washer 11–262 Washer 13–38 Ext. Tooth Lock Washer 14–2 Nylon Washer 16–28...
  • Page 33 Side Release Pedal Assembly Assembly part number 1210–1–150 Item Part Name Part No. Qty. 715–1–126 Side Control Pedal Pad 1210–1–152 Side Release Pedal Weldment 23.3...
  • Page 34 Notes 23.4...

  • Page 35: Jack Assembly

    Jack Assembly Assembly part number 715–270–10 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 45–904 O–Ring 45–110 O–Ring 715–1–340 Cap Assembly 388–1–38 Plug 390–1–243 Gasket 715–1–322 Reservoir 715–1–323 Actuator Cylinder 390–1–244 Gasket 715–1–325 Actuator 390–1–238 Gasket, Actuator 45–14 O–Ring (page 25)

  • Page 36: Jack Base Assembly

    Jack Base Assembly Assembly part number 715–270–5 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1210–70–12 Jack Base 45–110 O–Ring 1210–70–13 Base Plug 715–1–328 Piston Wear Ring 715–270–1 14–50 Bearing Retainer 45–966 O–Ring 715–1–327 Cylinder Wear Ring 38–311 Compression Spring 715–1–316...

  • Page 37: Pedal Base Assembly, Pump

    Pedal Base Assembly, Pump Assembly part number 715–1–108 Item Part No. Part Name Qty. 715–1–83 Pedal Ass’y Weldm’t, Pump 715–1–126 Side Control Pedal Pad 81–44 Bearing, Bronze NOTE Apply plastic adhesive to the mating surfaces of item B prior to assembly.

  • Page 38: Pedal Base Assembly, Head End, Left

    Pedal Base Assembly, Head End, Left Assembly part number 715–1–109 Item Part No. Part Name Qty. 715–1–98 Release Ped. Wldmt., Hd. Lt. 721–40–25 Pedal Pedal Base Assembly, Head End Right Assembly part number 715–1–110 Item Part No. Part Name Qty. 715–1–97 Release Pedal Weldment 721–40–25...

  • Page 39: Base Labeling Assembly

    Base Labeling Assembly FOOT END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 360–45–18 Brake/Steer Label, Head 360–45–11 Head Lower Label, Right 1 360–45–22 Venture Logo Label 360–45–12 Foot Lower Label, Right 715–1–134 Bellows 360–45–21 Brake/Steer Label, Foot 360–45–15 Pump Label, Left 360–45–16...
  • Page 40 Notes...
  • Page 41 Assembly part number 360–30–10...

  • Page 42: Litter Assembly (350/360)

    Litter Assembly Assembly part number 360–30–10 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 360–30–120 Frame Assembly 1010–26–69 Lock Support 938–1–401 Collar 721–26–66 Pivot Screw 28–23 Retaining Ring 721–26–69 Upright Sleeve 1001–40–12 Foot Board Receptacle 4–136 But.

  • Page 43: Litter Assembly (351/361)

    Litter Assembly Assembly part number 351–30–10 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3–40 Hex Hd. Cap Screw 25–38 Pop Rivet 3–76 Hex Hd. Cap Screw 25–50 Pop Rivet 3–78 Hex Hd. Cap Screw 25–79 Pop Rivet 4–135 But.
  • Page 44 Litter Assembly Assembly part number 351–30–10 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 351–30–39 Round Siderail Plug 1001–1–36 Hole Plug 360–26–80 Lock Hsg. Ass’y, Rt. 1001–40–12 Ft. Board Receptacle 360–26–81 Lock Hsg. Ass’y, Lt 1010–201–50 Support Roller (page 40) Siderail Ass’y, Left...

  • Page 45: Manual Fowler Assembly

    Manual Fowler Assembly Fowler Skin (Ref.) Fowler Frame (Ref.) Assembly part number 721–232–10 Frame Assembly (Ref.) Item Part No. Part Name Qty. 721–232–19 Brace Assembly 14–2 Nylon Flat Washer 3–54 Hex Hd. Cap Screw 16–28 Nylock Hex Nut 3–47 Hex Hd. Cap Screw 1001–32–22 Position Bar Rest 4–135...

  • Page 46: Pneumatic Fowler Assembly

    Pneumatic Fowler Assembly Assembly part number 360–31–10 Item Part No. Part Name Qty. 4–57 Screw 4–105 Pivot Bolt 4–234 Soc. Hd. Cap Screw 7–34 Truss Hd. Mach. Screw 11–16 Washer 11–132 Washer 13–12 Washer 14–21 Nylon Flat Washer 15–37 Jam Nut 15–50 Hex Nut 16–28...

  • Page 47: Stationary Foot End Assembly

    Stationary Foot End Assembly Assembly part number 360–32–10 Frame Assembly Item Part No. Part Name Qty. 721–232–11 Footsection Skin 7900–1–102 Velcro Pile 24 1/2” 25–122 Pop Rivet...

  • Page 48: Crank Knee Gatch Assembly

    Crank Knee Gatch Assembly Assembly part number 360–34–10 Frame Assembly (Ref.) Item Part No. Part Name Qty. (page 38) Knee Gatch Assembly 720–201–27 Midsection Skin 360–34–128 Thigh Skin 360–34–126 Calf Skin 25–122 Pop Rivet...

  • Page 49: Knee Gatch Assembly

    Knee Gatch Assembly Frame Assembly (Ref.) Assembly part number 360–34–20 Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 39) Gatch Crankscrew Ass’y 1510–34–90 Slider Pad 360–34–119 Gatch Riser 16–12 Flexlock Nut 946–1–65 Label 27–4 Cotter Pin 1010–234–15 Mounting Bracket Ass’y 14–21...

  • Page 50: Knee Gatch Crankscrew Assembly

    Knee Gatch Crankscrew Assembly Assembly part number 1001–34–19 Item Part No. Part Name Qty. 946–33–18 Crank Disk 1550–1–16 Crank Assembly 26–45 Roll Pin 26–14 Roll Pin 81–176 Thrust Washer 81–175 Thrust Bearing 81–174 Thrust Washer 938–1–175 Bearing Assembly 938–1–177 Knob 378–24–29 Shoulder Bolt 16–5...

  • Page 51: Siderail Assembly, Right & Left

    Siderail Assembly, Right & Left Assembly part numbers 360–26–96 (right) 360–26–97 (left) (RIGHT SIDE IS SHOWN) Item Part No. Part Name Qty. 1010–26–15 Top Rail 360–26–83 Upright 1010–26–82 Sleeve Bearing 25–106 Semi–Tubular Rivet 1010–26–10 Round Hole Plug 360–26–85 Latch Upright 1010–26–12 Bent Spindle Stop...
  • Page 52 Siderail Assembly, Right & Left Assembly part numbers 360–26–196 (Right) 360–26–197 (Left) (RIGHT SIDE IS SHOWN) Item Part No. Part Name Qty. 1010–26–15 Top Rail 360–26–183 Upright 1010–26–82 Sleeve Bearing 25–106 Semi–Tubular Rivet 1010–26–10 Round Hole Plug 360–26–185 Latch Upright 1010–26–12 Bent Spindle Stop 40.1...
  • Page 53 Notes 40.2...

  • Page 54: Pole Mounting Assembly (350/360)

    I.V. Pole Mounting Assembly Assembly part number 360–110 Frame Assembly p/n 360–30–20 (Ref.) Item Part No. Part Name Qty. (page 44) I.V. Pole Assembly 4–83 Soc. Hd. Cap Screw 11–16 Washer 1001–59–12 I.V. Pole Clip 16–3 Fiberlock Nut 3–47 Hex Hd. Cap Screw 3–50 Hex Hd.

  • Page 55: Pole Mounting Assembly (351/361)

    I.V. Pole Mounting Assembly Assembly part number 351–110 Item Part No. Part Name Qty. 3–47 Hex Hd. Cap Screw 3–50 Hex Hd. Cap Screw 4–83 Soc. Hd. Cap Screw 11–16 Washer 16–3 Fiberlock Nut 16–28 Nylock Nut (page 43) I.V. Pole Assembly 1001–59–12 I.V.

  • Page 56: Pole Assembly (351/361)

    I.V. Pole Assembly Assembly part number 351–110–40 Item Part No. Part Name Qty. 2–28 Screw 926–400–62 Stop Sleeve 52–17 Spacer 1010–59–16 I.V. Hook 14–20 Nylon Washer 351–110–31 Extension Rod 351–110–33 Base Tube Assembly 24–53 Knob 26–10 Roll Pin 360–110–35 I.V. Pole Link 360–110–14 I.V.

  • Page 57: Pole Assembly (350/360)

    I.V. Pole Assembly Assembly part number 360–110–40 Item Part No. Part Name Qty. 2–44 Screw 926–400–62 Stop Sleeve 52–17 Spacer 1010–59–16 I.V. Hook 14–20 Nylon Washer 351–110–31 Extension Rod 351–110–33 Base Tube Assembly 24–53 Knob 26–10 Roll Pin 360–110–35 I.V. Pole Link 360–110–14 I.V.
  • Page 58 Tethered I.V. Pole Mounting Assembly Assembly part number 721–287–20 Item Part No. Part Name Qty. (page 46) Trough Assembly (page 47) I.V. Pole Assembly 34–22 Cord Clamp 25–79 Pop Rivet 4–85 Soc. Hd. Cap Screw 16–3 Nylock Nut...

  • Page 59: Tethered I.v. Pole Trough Assembly

    Tethered I.V. Pole Trough Assembly Assembly part number 721–287–22 Item Part No. Part Name Qty. 1001–87–23 Machined Sleeve 721–287–16 Front Mounting Bracket 721–287–15 Mounting Bracket Ass’y 1–22 Flat Hd. Mach. Screw 37–2 Tube Plug 946–40–110 Lock Clip 16–14 Hex Nut...

  • Page 60: Tethered I.v. Pole Assembly

    Tethered I.V. Pole Assembly Assembly part number 1001–87–18 Item Part No. Part Name Qty. 721–47–6 I.V. Holder 1010–22–27 Cable Assembly 741–47–14 Retainer 21–16 Set Screw...

  • Page 61: Oxygen Bottle Holder Assembly

    Oxygen Bottle Holder Assembly Assembly part number 360–140 Item Part No. Part Name Qty. 4–161 But. Hd. Cap Screw 700–140–45 O2 Bottle Holder 390–1–115 Bumper 360–140–44 Rear Support Pillar 3–47 Hex Hd. Cap Screw 360–140–43 Pillar Assembly 3–76 Hex Hd. Cap Screw 16–28 Lock Nut 11–3...

  • Page 62: Storage Tray Assembly

    Storage Tray Assembly Assembly part number 360–120 Hood Ass’y 360–45–125 (Ref.) Item Part No. Part Name Qty. 360–120–115 Storage Tray 4–161 But. Hd. Cap Screw 16–28 Nylock Nut...

  • Page 63: Foot Extension/Defibrillator Tray Assembly

    Foot Extension/Defibrillator Tray Assembly Assembly part number 1010–50–210* Label Detail Label Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8–49 Socket Hd. Shoulder Bolt 1010–50–50 Knob 14–20 Nylon Washer 1010–50–57 “Max. Weight” Label 14–21 Nylon Washer 1010–50–205 Cushion Assembly 16–28...

  • Page 64: Defibrillator Tray Assembly

    Defibrillator Tray Assembly Assembly part number 926–39–10 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 946–39–4 Tray 926–1–82 Label 926–39–16 Crosstube 390–57–12 Long Strap 25–55 Rivet 390–57–13 Short Strap 926–39–9 Cover 946–1–283 Label 18–6 Umbrella Nut 926–39–15 Holder 7900–1–143...

  • Page 65: Foot Board/Chartholder Assembly

    Foot Board/Chartholder Assembly Assembly part number 926–40–10 Item Part No. Part Name Qty. 946–28–11 Chart Holder 946–29–6 Foot Board Upright Oxygen Bottle Holder Assembly Assembly part number 1020–30 Item Part No. Part Name Qty. 1020–30–11 Upright Bottle Holder 27–12 Cotter Pin 1020–30–17 Specification Label...

  • Page 66: C-Spine Cassette Holder Assembly

    C–Spine Cassette Holder Assembly Assembly part number 1001–70–1 Item Part No. Part Name Qty. 1010–70–25 I.V. Adaptor 1010–70–18 Specification Label 11–3 Flat Washer 4–91 Soc. Hd. Cap Screw (page 54) Support Pole Assembly (page 55) Storage Bracket Ass’y 16–5 Conelock Nut 3–50 Hex Hd.

  • Page 67: C-Spine Support Pole Assembly

    C–Spine Support Pole Assembly Assembly part number 1010–70–10 View A–A Item Part No. Part Name Qty. 1010–70–33 Support Tube Cap 26–6 Roll Pin 1010–70–34 Support Arm Weldment 1010–70–42 Cassette Holder Weldment 1010–70–50 Adjustment Tube Weldment 1010–70–30 Base Tube Weldment 1010–70–45 Knob 25–55 Pop Rivet...

  • Page 68: C-Spine Storage Bracket Assembly

    C–Spine Storage Bracket Assembly 6.5” (Ref.) 2” (Ref.) Assembly part number 1010–70–19 Item Part No. Part Name Qty. 1010–70–20 Storage Bracket Weldment 1010–70–45 Knob 1010–70–23 Storage Label...

  • Page 69: Stirrup And Support Assembly

    Stirrup and Support Assembly Assembly part number 1001–55–10 Item Part No. Part Name Qty. (page 57) Stirrup Support Ass’y, Rt. (page 58) Stirrup Support Ass’y, Lt. (page 59) Stirrup Assembly 22–8 Drive Screw 3–78 Hex Hd. Cap Screw 16–28 Nylock Hex Nut 11–158 Flat Washer 25–79...

  • Page 70: Right Stirrup Support Assembly

    Right Stirrup Support Assembly Assembly part number 1001–55–15 Item Part No. Part Name Qty. 1010–55–16 Right Support Tube Ass’y 1001–55–11 Mounting Bracket 650–2–32 Lock Screw Assembly 966–51–19 Wedge Lock, Modified 38–171 Compression Spring 26–7 Roll Pin 14–40 Nylon Flat Washer 24–11 Knob...

  • Page 71: Left Stirrup Support Assembly

    Left Stirrup Support Assembly Assembly part number 1001–55–16 Item Part No. Part Name Qty. 1010–55–26 Left Support Tube Ass’y 1001–55–11 Mounting Bracket 650–2–32 Lock Screw Assembly 966–51–19 Wedge Lock, Modified 38–171 Compression Spring 26–7 Roll Pin 14–40 Nylon Flat Washer 24–11 Knob...

  • Page 72: Stirrup Assembly

    Heel Stirrup Assembly Assembly part number 1010–55–29 Item Part No. Part Name Qty. 390–20–13 Stirrup 390–20–9 Stirrup Holder Assembly 1010–55–30 Extension Tube Assembly 24–11 Knob 26–43 Roll Pin 22–8 Drive Screw...

  • Page 73: Push Bar Assembly

    Push Bar Assembly Assembly part number 360–155 Item Part No. Part Name Qty. 360–155–10 Push Bar Weldment 1001–155–14 Push Bar Socket Weldment 26–12 Roll Pin 3–23 Hex Hd. Cap Screw 16–28 Nylock Nut 360–155–18 Spacer...

  • Page 74: Warranty

    No employee or representative of Stryker is authorized to change this warranty in any way. Stryker Medical stretchers are designed for a 10 year expected life under normal use conditions and appropri- ate periodic maintenance as described in the maintenance manual for each device.

  • Page 75: Return Authorization

    Warranty Return Authorization: Merchandise cannot be returned without approval from the Stryker Customer Service Department. An autho- rization number will be provided which must be printed on the returned merchandise. Stryker reserves the right to charge shipping and restocking fees on returned items. SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN.
  • Page 76 6300 Sprinkle Road, Kalamazoo, MI 49001–9799 (800) 327–0770 DH 2/97 351–90–40 REV B...

This manual is also suitable for:

Venture 350Venture 351Venture 360Venture 361

Table of Contents