Dream Line AQUA LUX Installation Manual

Shower / tub door

Advertisement

AQUA LUX Shower / Tub Door Installation Manual
Important
Please read carefully the following instructions before installing your shower door. If you have
any questions on this shower door installation, please call our technical support specialists
Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3 or e-mail our technical
support group at
support@BathAuthority.com
Our product may have changes without prior notice
Rev.1.2 
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQUA LUX and is the answer not in the manual?

Questions and answers

Summary of Contents for Dream Line AQUA LUX

  • Page 1 AQUA LUX Shower / Tub Door Installation Manual Important Please read carefully the following instructions before installing your shower door. If you have any questions on this shower door installation, please call our technical support specialists Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3 or e-mail our technical support group at support@BathAuthority.com...
  • Page 2: Tools Required

    Preparation 1. After opening the boxes, read this introduction carefully, check all the packed parts are complete by cross checking all the components against the “Detailed Diagram of Shower Door Components”. Examine for shipping damage. If the unit has been damaged or has a finishing defect, please contact your local distributor within 3 business days.
  • Page 3: Packing List

    Detailed Diagram of Shower Door Components Packing List Stationary glass Screw ST 4.2×30 3pcs Support bar Side strip ( 3 sections to cut) Hinge 2pcs Bottom anti-water strip Glass door Round head screw ST 4.2×25 Handle Decorative cover Wall Bracket 2pcs Bottom bracket (for 72”...
  • Page 4: Installation

    Installation 1. Take out Stationary glass panel (01) from the package and find the Wall Brackets (06). Attach Wall Brackets to the glass panel. Note that the parts of the Wall Brackets with the mounting holes should face inward so that when glass panels are in place, mounting bolts are only visible from the inside.
  • Page 5 fig. 1 fig. 2 fig. 3 fig. 4 Rev.1.2  Page 5...
  • Page 6 fig. 5 fig. 6 fig. 7 fig. 8 Rev.1.2  Page 6...
  • Page 7: Maintenance

    fig. 9 Maintenance 1. Tempered glass can be cleaned with nonabrasive bathroom cleaner or any glass cleaner you use elsewhere in your home. Rinse off any glass cleaner that gets on the metal parts as soon as possible to avoid damage to the metal surface. Avoid striking it with any sharp or hard objects.

Table of Contents