iCarsoft CR Genius User Manual
  1. Manuals
  2. Brands
  3. iCarsoft Manuals
  4. Diagnostic Equipment
  5. CR Genius
  6. User manual

iCarsoft CR Genius User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CR Genius
User Manual
PROFESSIONAL . FAST . SMART . POWERFUL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR Genius and is the answer not in the manual?

Questions and answers

Related Manuals for iCarsoft CR Genius

Summary of Contents for iCarsoft CR Genius

  • Page 1 CR Genius User Manual PROFESSIONAL . FAST . SMART . POWERFUL...
  • Page 3 Trademarks iCarsoft, CR Genius is trademarks of iCarsoft Technology Inc., registered in the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of iCarsoft.
  • Page 4 Safety Instructions The safety messages herein cover situations iCarsoft is aware of. iCarsoft cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
  • Page 5 ignition wires and spark plugs. These components create hazardous voltages when the engine is running.  Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.  Do not connect or disconnect any test equipment while the ignition is on or the engine is running.

  • Page 6: Table Of Contents

    1.1.3 Hyperlink ................1 1.1.4 Illustrations ..............1 1.1.5 Operation ................2 2 General Introduction ............... 2 2.1 CR Genius Display Tablet ............2 2.1.1 Functional Description ............ 2 2.1.2 Power Sources ..............4 2.1.3 Technical Specifications ..........4 2.2 Accessory Kit ................5 2.2.1 Main Cable ................
  • Page 7 4.4.1 Quick Test ..............17 4.4.2 Auto Scan ............... 19 4.4.3 Control Unit ..............19 4.4.4 Quick Erase ..............19 4.4.5 Service................20 4.5 Diagnostic operation ............. 20 4.6 Generic OBDII Operations ............. 27 4.6.1 General Procedure ............27 4.6.2 Function Descriptions ........... 29 4.7 Exiting Diagnostics ...............
  • Page 8 10.3 Data log ................79 10.4 WIFI ..................79 10.5 Data & Time ................80 10.6 Brightness ................81 10.7 Screen Sleep ................ 81 10.8 Vehicle Sorted By ..............82 10.9 Restore Default User Profiles ..........83 10.10 Restore Factory Tablet System ......... 83 11 About ....................

  • Page 9: Using This Manual

    1 Using this Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Conventions The following conventions are used. 1.1.1 Bold Text Bold text is used to highlight selectable items such as buttons and menu options.

  • Page 10: Operation

    5-inch LCD touchscreen that displays at 1280 x 720 quality. Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, CR Genius provides you with superior special functions, including OIL (Oil Reset Service),...
  • Page 11 --- Up, down, left and right buttons: Move the cursor up, down, left or right for selection. --- ENTER Button: Confirms a selection (or action) from a menu list. --- Home Button: Return to the main menu. Figure 2-2 CR Genius Display Tablet Back View Heat Sink.

  • Page 12: Power Sources

    Figure 2-3 CR Genius Display Tablet Top View Mini USB Port. DB15-Pin Port – connects the main cable. Lock/Power Button – long press button to turn tablet off and on. Quick press button to lock screen. 2.1.2 Power Sources The Display Tablet can receive power from any of the following sources: ...

  • Page 13: Accessory Kit

    5-inch LCD capacitive touchscreen with Display 1280x720 resolution  Mini USB 2.0  Connectivity Wi-Fi (2.4GHz)  OBDII Body Color Black  OBD DLC Voltage Range:9-18V  3.7V/5000mAh lithium-polymer battery Power and Battery  Charges via 5V DC power supply Tested Battery Life Around 5 hours of continuous use Battery Charging Input...

  • Page 14: Other Accessories

    Figure 2-4 Main Cable 2.2.2 Other Accessories Mini USB Cable Connects the Display Tablet to the PC or DC external power adapter. USB External Power Adapter Together with the mini USB cable, connects the Display Tablet to the external DC power port for power supply.

  • Page 15: Powering Up

    3.1 Powering Up Long press the power/lock button on the top right corner of the tablet to power on the device. The system will start and display the CR Genius main menu. Figure 3-1 Sample CR Genius Job Menu...

  • Page 16: Locator And Navigation Buttons

    See User Data Operations on chapter 7. Manage the application and database Uninstall installed on the CR Genius tablet. See Uninstall Operations on chapter 8. Feedback and get on-line service from Support iCarsoft with the CR Genius tablet.

  • Page 17: Powering Down

    (ABS), airbag system (SRS) and more. 4.1 Getting Started The Diagnostics operations require connecting the CR Genius to the test vehicle’s DLC using the main cable. 4.1.1 Vehicle Menu Layout When the tablet is properly connected to the vehicle, the platform is ready to start vehicle diagnosis.
  • Page 18 Table 4-1 Right Toolbar Buttons Button Name Description Back Returns to the CR Genius Job Menu. Displays a menu of vehicle manufacturers. Displays stored test vehicle history records. History Tap record to review record in detail. Displays the USA vehicle menu.

  • Page 19: Vehicle Identification

    4.2.1 Auto Identify The CR Genius diagnostic system features the latest VIN-based Auto VIN Scan function to identify vehicles with just one touch, enabling the technician to quickly identify the vehicle, scan all the diagnosable ECUs on the vehicle and perform diagnostics on the selected system.
  • Page 20 Automatic VIN identification  To perform VIN Identify Tap the Diagnostics application button from the CR Genius Job Menu. The Vehicle Menu displays. Figure 4-3 Sample VIN Identification Screen 1 Select vehicle brand. Tap the “Auto Identify”, Wait for the vehicle to communicate.
  • Page 21 Genius diagnostic system allows you to enter the vehicle VIN manually.  To perform Manual VIN Input Tap the Diagnostics application button from the CR Genius Job Menu. The Vehicle Menu displays. Select vehicle brand. If some vehicles do not support automatic VIN code recognition, you need to enter the VIN code manually.

  • Page 22: Vehicle Select

    Figure 4-8 Sample Vehicle Select Screen 1  To perform Vehicle Select Tap the Diagnostics application button from the CR Genius Job Menu. The Vehicle Menu displays. Tap the vehicle brand of the test vehicle.

  • Page 23: Navigation

    Tap the "Vehicle Select" option to make a series of selections according to the on-screen prompts, select the correct vehicle model, model year, etc.. Figure 4-9 Sample Vehicle Select Screen 2 Select step by step according to the screen prompts, and finally enter the list of diagnosis modes.

  • Page 24: Screen Messages

    Button area The Status Information Bar at the right of the Main Section displays the following items: 1) Back button – Returns to the CR Genius Job Menu. 2) Voltage Icon – displays the vehicle’s voltage status. 4.3.2 Screen Messages Screen messages appear when additional input is needed before proceeding.

  • Page 25: Making Selections

    briefly. Warning Messages This type of messages displays a warning that a selected action may result in an irreversible change or loss of data. The typical example of this is the “Erase Codes” message. Error Messages Error messages display when a system or procedural error has occurred. Examples of possible errors include a disconnection or communication interruption.
  • Page 26 Scan the control unit of the whole vehicle, at the same time, the fault information of each control unit is detected to show the control unit list and fault status. Figure 4-12 Sample Quick Test Screen 1. Main Section Left side – Show vehicle control unit system name. Right side –...

  • Page 27: Auto Scan

    4.4.2 Auto Scan The Auto Scan function performs a comprehensive scanning of the ECUs in the vehicle’s system to locate and retrieve DTCs. Enter Auto Scan, the system will scan your vehicle’s system for you. Figure 4-13 Sample Auto Scan Screen 4.4.3 Control Unit This option allows you to manually locate the desired control system.

  • Page 28: Service

    Quick erase the vehicle fault information recorded in the diagnosis process. 4.4.5 Service The vehicle diagnostic tool provides an entry from the diagnostic mode to the service function. You can easily select the service function from the diagnosis mode, without returning to the service menu for selection. For different vehicle models, the service functions are different.
  • Page 29 Figure 4-16 Sample Diagnostic Operation Screen The Function Menu options vary slightly for different vehicles. The function menu may include: Module Information – Read full electronic system module information, such as VIN, part number, version, supplier, production date of ECU. Read fault code –...
  • Page 30 Figure 4-17 Sample Module Information Screen  Read Fault Codes This function retrieves and displays the DTCs from the vehicle’s control system. The Read Codes screen varies for each vehicle being tested. On some vehicles, freeze frame data can also be retrieved for viewing. The sample Read Codes screen displays as below: Figure 4-18 Sample Read Fault Codes Screen 1 Functional Button...
  • Page 31 Figure 4-19 Sample Read Fault Codes Screen 2 – tap this icon to view the information of the freeze frame.  Figure 4-20 Sample Read Fault Codes Screen 3  Clear Fault Codes After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can erase the codes from the vehicle using this function.
  • Page 32 Select [OK] to continue. After the operation is successful, an complete information will be displayed on the screen. Select [Cancel] to exit. Re-enter the [Read fault code] function to retrieve the fault code to ensure the successful code clearing operation. ...
  • Page 33 Figure 4-22 Sample View Data Screen 2 Main Section  Name Column – displays the parameter names. Check Box – tap the check box on the left side of the parameter name to make item selection. Tap the check box again to de-select the item.
  • Page 34 Text Mode – this is the default mode that displays the parameters in texts and displays in list format. NOTE Reading of status parameters, such as a switch reading, which are mostly in word form, such as ON, OFF, ACTIVE, and ABORT, can only be displayed in Text Mode.

  • Page 35: Generic Obdii Operations

    4.6.1 General Procedure  To access the OBDII/EOBD diagnostics functions Tap the Diagnostics application button from the CR Genius Job Menu. The Vehicle Menu displays. Tap the OBD button. The device will automatically establish...
  • Page 36 communication with the vehicle, as shown in the figure below: Figure 4-24 Sample OBDII Screen 1 When the communication is complete, vehicle protocol information will be displayed. Tap OK to proceed to the next step. Figure 4-25 Sample OBDII Screen 2 Select a specific protocol under the Protocol option.

  • Page 37: Function Descriptions

    Figure 4-26 Sample OBDII Diagnostic Menu NOTE Tapping ○ i button beside the function name to display additional function information. Select a function option to continue.  Read Codes  Erase Codes  I/M Readiness  Live Data  Freeze Frame ...
  • Page 38 Figure 4-27 Sample Read Codes Screen Stored codes are the current emission related DTCs from the ECM of the vehicle. OBDII/EOBD Codes have a priority according to their emission severity, with higher priority codes overwriting lower priority codes. The priority of the code determines the illumination of the MIL and the codes erase procedure.

  • Page 39: Exiting Diagnostics

    CR Genius Job Menu. Once the Diagnostics application is no longer communicating with the vehicle, it is safe to open other CR Genius applications, or exit the CR Genius Diagnostic System and return to the Home screen.

  • Page 40: Service Operations

    5 Service Operations The Service section is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.
  • Page 41 Using BMW as an example:  To perform ABS Bleeding functions Tap the Service application button from the CR Genius Job Menu. Tap ABS Bleeding button and wait for the vehicle manufacturer screen. Then tap BMW icon from the screen. Waiting for vehicle communication.
  • Page 42 Figure 5-3 Sample ABS Bleeding Function Screen 2 Read the information on the screen carefully and prepare according to the requirements of the screen. After working on the brake system, the brake bleeding routine must be carried out. Figure 5-4 Sample ABS Bleeding Function Screen 3 Make corresponding preparations, connect the bleeder unit and turn on the switch.
  • Page 43 Figure 5-5 Sample ABS Bleeding Function Screen 4 The screen prompts has the brake system has been flushed? If so, tap Yes to continue. Figure 5-6 Sample ABS Bleeding Function Screen 5 In the following procedure, perform the exhaust procedure separately.

  • Page 44: Oil Reset(Oil) Service

     Set the distance driven since last oil change： Tap the Service application button from the CR Genius Job Menu. Tap Oil icon and wait for the vehicle manufacturer screen. Then tap Benz icon from the screen. Waiting for vehicle communication.
  • Page 45 details, please refer to the introduction of the vehicle identification chapter. Select the "Distance driven since last oil change" option in the function list. Turn on the vehicle ignition. Figure 5-8 Sample OIL Function Screen 1 Wait for communication between vehicle and equipment. When the data stream interface appears, tap [Reset] to next step.
  • Page 46  Set the number of days since last oil change： Tap the Service application button from the CR Genius Job Menu. Tap Oil Reset button and wait for the vehicle manufacturer screen. Then you can tap Auto Identify to acquire vehicle VIN information and tap OK to confirm.

  • Page 47: Electronic Parking Brake (Epb) Service

    Figure 5-12 Sample OIL Function Screen 5 Enter the number of days after oil change and tap [OK] to next step until the application is completed. Tap [OK] to exit. Figure 5-13 Sample OIL Function Screen 6 5.3 Electronic Parking Brake (EPB) Service This function has a multitude of usages to maintain the electronic braking system safely and effectively.
  • Page 48 Tap the Service application button from the CR Genius Job Menu. Tap EPB button and wait for the vehicle manufacturer screen. Then tap Jaguar icon from the screen. Waiting for vehicle communication. You can tap Auto Identify to acquire vehicle VIN information and tap OK to confirm.
  • Page 49 Figure 5-15 Sample EPB Function Screen 2 As shown in the figure below, make sure that the parking brake is switched on and the shift lever is in N gear. Operate the clutch as required when the engine is running. Figure 5-16 Sample EPB Function Screen 3 Press the [OK] to next step until the calibration is successful, fully depress the clutch pedal, select neutral and release the clutch...

  • Page 50: Electronic Throttle Control (Etc) Service

    Using Benz as an example  To perform Throttle functions Tap the Service application button from the CR Genius Job Menu. Tap Throttle icon and wait for the vehicle manufacturer screen. Then tap Benz icon from the screen. Waiting for vehicle communication.

  • Page 51: Injector Coding (Inj) Service

    Figure 5-19 Sample ETC Function Screen 1 Read the operator message on the screen, tap OK to proceed to the next step, and set the learning parameters as required. Figure 5-20 Sample ETC Function Screen 2 Press the [Yes] button to perform the learning process. Until the application is complete, press [OK] to exit.
  • Page 52  To perform Injector functions Tap the Service application button from the CR Genius Job Menu. Tap Injector icon and wait for the vehicle manufacturer screen. Then tap Land Rover icon from the screen. Waiting for vehicle communication.
  • Page 53 Figure 5-22 Sample Injector Function Screen 2 Read the screen prompts carefully, you will know the information about the fuel injector code. Follow the screen operation step by step, tap [OK] to perform the next step. Figure 5-23 Sample Injector Screen 3 NOTE During the procedure, the engine shall be off.
  • Page 54 Figure 5-24 Sample Injector Screen 4 Read the 10 digit sensor code from the replaced injector, press the [OK] to call up the input box and input the identification number. Figure 5-25 Sample Injector Function Screen 5 Press [OK] to complete the execution. You can perform the next injector code change or exit application.

  • Page 55: Steering Angle Sensor (Sas) Service

    NOTE 1) ICARSOFT accepts no responsibility for any accident or injury arising from servicing the SAS system. When interpreting DTCs retrieved from the vehicle, always follow the manufacturer’s recommendation for repair.
  • Page 56 Tap the Service application button from the CR Genius Job Menu. Tap SAS button and wait for the vehicle manufacturer screen. Then tap Jaguar icon from the screen. Waiting for vehicle communication.
  • Page 57 Figure 5-28 Sample SAS Function Screen 2 Read the 3 to 10 digits on the steering column label as required and enter the input on the next screen. Figure 5-29 Sample SAS Function Screen 3 Tap the screen to call up the keyboard, enter 3 to 10 digits on the steering column label, and then tap OK to next.

  • Page 58: Battery Management System (Bms) Service

    Figure 5-30 Sample SAS Function Screen 4 The system will enter communication, until the application program is completed. Tap OK to exit. Figure 5-31 Sample SAS Function Screen 5 5.7 Battery Management System (BMS) Service The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
  • Page 59 Using BMW as an example.  To display the battery history Tap the Service application button from the CR Genius Job Menu. Tap BMS button and wait for the vehicle manufacturer screen. Then tap BMW icon from the screen. Waiting for vehicle communication.
  • Page 60 Figure 5-32 Sample BMS Function List Tap on the service to perform. In this case, it is function 1：Display distance reading at last battery exchange and one before last. A notice screen displays. Figure 5-33 Sample BMS Screen 1 Read carefully the complete information and tap OK.
  • Page 61 Figure 5-34 Sample BMS Screen 2 Check the battery capacity and the battery replacement information displayed. Then tap OK. Figure 5-35 Sample BMS Screen 3  To register the battery replacement 1. Tap on the corresponding service you want to carry out. In this case, it is function 2 Register battery exchange.
  • Page 62 Figure 5-36 Sample BMS Screen 4 2. Read carefully the information on the screen and tap OK to view all the functions listed. Four functions are listed: Figure 5-37 Sample BMS Screen 5 1) Enter battery exchange: Same capacity 2) Enter battery exchange: Higher/lower capacity 3) Enter battery exchange: Change from normal lead-acid battery (white housing) to AGM battery (black housing) 4) End service function.
  • Page 63 Figure 5-38 Sample BMS Function Screen Using function 1 as an example. Read carefully the information on the screen and Waiting for battery component replacement. Figure 5-39 Sample BMS Screen 7 2) Once the code was accepted and the exchange is complete.

  • Page 64: Diesel Particulate Filter (Dpf) Service

    Figure 5-40 Sample BMS Screen 8 5.8 Diesel Particulate Filter (DPF) Service The DPF function allows you to carry out numerous functions to the Diesel Particulate Filter system. The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
  • Page 65 Using Land Rover as an example:  To preform DPF functions 1. Tap the Service application button from the CR Genius Job Menu. 2. Tap DPF icon and wait for the vehicle manufacturer screen. Then tap Land Rover icon from the screen. Waiting for vehicle communication.
  • Page 66 Figure 5-42 Sample DPF Service Function Screen 2 6. Follow the instructions on the screen step by step, and start the vehicle to drive at a speed higher than 40 km for about 15 minutes. Drive the vehicle to the required speed and press the "OK" button when the speed is reached.
  • Page 67 Figure 5-44 Sample DPF Service Function Screen 4 Subsequent procedures will force the engine management system to perform a diesel particulate filter regeneration. Figure 5-45 Sample DPF Service Function Screen 5 Regeneration is completed when it is indicated that the soot mass in the particulate filter is now at an acceptable lower limit.

  • Page 68: Tire Pressure Monitor System (Tpms) Service

    On completion, a specific road test will be required followed by the tire pressure monitor system confirmation application. Tap the Service icon from the CR Genius Job Menu. Tap TPMS icon and wait for the vehicle manufacturer screen. Then...
  • Page 69 tap Jaguar icon from the screen. Waiting for vehicle communication. You can tap Auto Identify to acquire vehicle VIN information and tap OK to confirm. Or you can tap the Vehicle Select to choose the correct vehicle according to the on-screen instructions. For details, please refer to the introduction of the vehicle identification chapter.
  • Page 70 Figure 5-49 Sample TPMS Function Screen 3 Read the on-screen prompt carefully, which will tell you how to obtain the 8-digit sensor identification code. Figure 5-50 Sample TPMS Function Screen 4 Read the 8-digit sensor identification code from the replacement sensor.
  • Page 71 Figure 5-51 Sample TPMS Function Screen 5 Input 8-bits Sensor Identifications as required, and press [OK]. Figure 5-52 Sample TPMS Function Screen 6 After passing the 8-bit sensor identification test, carry out a specific road test.
  • Page 72 Figure 5-53 Sample TPMS Function Screen 7 After the driving cycle, confirm the tire pressure monitor system application. Figure 5-54 Sample TPMS Function Screen 8 NOTE The vehicle must remain stationary for at least 15 minutes with the ignition off, this will place the sensors into sleep mode.

  • Page 73: Upgrade

    Figure 6-1 Sample Update Screen – for CR Genius ① Status Bar  Left Side – displays the CR Genius device model information and serial number.  Right Side – displays an update progress bar and indicates the number of updates.

  • Page 74: User Data

    1. Make sure the Display Tablet is connected to a power source with stable access to the internet. 2. Tap the Upgrade application button from the CR Genius Job Menu; or tap the update notification message when received; or tap the Upgrade icon on Vehicle Menu in Diagnostics application.

  • Page 75: Fault Code

    Figure 7-1 Sample User Data Main Screen User Data Operations are based on toolbar controls. Details are explained in the following sections. 7.1 Fault code Fault code allows you to query the fault history and information description according to the model fault code. Slide up and down to select the required model and code.

  • Page 76: Image Files

    Figure 7-3 Sample Image Screen 7.3 User Manual The user manual section provides users to view the CR Genius user manual, quick operation guide, how to create a report, how to perform feedback, etc.

  • Page 77: Play Back

    Figure 7-4 Sample User Manual Screen 7.4 Play Back The playback section allows you to view diagnostic data, live data, and fault codes on the system.  To view live data: 1. Tap the Play back icon on the User Data application. The screen display the data list of diagnostic data, live data, and fault codes.
  • Page 78 Figure 7-6 Sample Play Back Screen 1 3. Select the check box in the lower right corner of each list, tap the button in the upper right corner to execute PDF output function or delete. Figure 7-7 Sample Play Back Screen 2 Perform PDF output function：...
  • Page 79 Figure 7-8 Sample Play Back Screen 3 2） After the adjustment is completed, tap the button the upper right corner, and an interface for outputting the report to PDF appears. Fill in the file name, vehicle, customer, and operator, and press the save button. Figure 7-9 Sample Play Back Screen 4 3）...
  • Page 80 Figure 7-10 Sample Play Back Screen 5 4） After the save is complete, the screen will show a message indicating that the save is successful, and inform the user of the save path of the report. Figure 7-11 Sample Play Back Screen 5 5）...

  • Page 81: Report

    Figure 7-12 Sample Play Back Screen 7 7.5 Report In the Report option, view the report of the vehicle data in Play Back after the PDF is output. Figure 7-13 Sample FAQ Screen 7.6 Data Link Connector (DLC) Location This function is to provide the location of the data link connector (DLC), represented by A, B, C, D, E respectively.

  • Page 82: Uninstall

    8 Uninstall This section allows you to manage the software applications installed on the CR Genius Diagnostics System. Select this section to open a management screen, on which you can check all the available vehicle diagnostic applications. By clicking on each line of car brand to select the car software to be removed, the selected item displays a red check in the check box on the right.

  • Page 83: Support

    9 Support This application launches the Support platform which synchronizes iCarsoft’s on-line service base station with the Display Tablet. In order to synchronize the device to your on-line account, you need to register the product through the Internet when you use it for the first time. The Support application is connected to iCarsoft’s service channel and on-line communities which provides...

  • Page 84: Settings

    Figure 9-1 Sample Data log Screen 1 Select the check box behind the log, you can select multiple logs at the same time, tap the delete button in the upper right corner to delete. Select the check box behind the log, you can select multiple logs at the same time, tap the feedback button in the upper right corner.

  • Page 85: Unit

    CR Genius system. There are ten system settings:  Unit  Language  Data Log  WIFI  Data & time  Brightness  Screen Sleep  Vehicle Sorted By  Restore Default User Profiles ...

  • Page 86: Language

    CR Genius home screen or select another setting. Figure 10-2 Sample Unit Setting Screen 10.2 Language This option allows you to adjust the display language for the CR Genius application.  To adjust the language setting Tap the Settings application on the CR Genius Job Menu.

  • Page 87: Data Log

    Then swipe up from the bottom of the screen or swipe down from the top of the screen to bring up the bottom tab bar, and tap the back button at the bottom to return to the CR Genius main screen or select other settings.

  • Page 88: Data & Time

    Then swipe up from the bottom of the screen or swipe down from the top of the screen to bring up the bottom tab bar, and tap the back button at the bottom to return to the CR Genius main screen or select other settings.

  • Page 89: Brightness

    This option allows you to modify the brightness setting of the diagnostic system.  To adjust the brightness setting Tap the Settings application on the CR Genius Job Menu. Tap the brightness option on the screen. Slide the small dot on the pop-up window to select the appropriate brightness.

  • Page 90: Vehicle Sorted By

    This option allows you to modify the vehicle classification settings.  To adjust the Screen Sleep setting Tap the Settings application on the CR Genius Job Menu. Tap the Vehicle Sorted By option on the screen. On the pop-up window, select the vehicle classification type you want, alphabetically or by frequency of use.

  • Page 91: Restore Default User Profiles

    This option allows you to return to Default User Profiles.  To adjust to Restore Default User Profiles settings Tap the Settings application on the CR Genius Job Menu. Tap the Restore Default User Profiles option on the screen. This operation will return to the default user configuration, including unit, brightness, data switch, screen sleep and vehicle sorted by.

  • Page 92: About

    Then tap the Back button on the bottom right corner to return to the CR Genius home screen or select another setting. Figure 10-12 Sample Restore Factory Setting Screen 11 About The About screen lists the CR Genius’s version, hardware, and serial number.  To check the CR Genius product information in About...

  • Page 93: Maintenance And Service

    2. Tap the About option on the left column. The product information screen displays on the right. 3. Tap the Back button on the top left corner to return to the CR Genius home screen, or select another setting option for the system setup after viewing.

  • Page 94: Troubleshooting Checklist

     Your device may have not been connected to the charger properly. Check the connector. NOTE If your problems persist, please contact iCarsoft’s technical support personnel or your local selling agent. 12.3 About Battery Usage Your tablet is powered by a built-in Lithium-ion Polymer battery. This means that, unlike other forms of battery technology, you can recharge your battery while some charge remains without reducing your tablet’s autonomy due to the...

  • Page 95: Service Procedures

     Email: support@icarsoft.com 12.4.2 Repair Service If it becomes necessary to return your device for repair, please download the repair service form from www.iCarsoft.com, and fill it in. The following information must be included:  Contact name  Return address...

  • Page 96: Other Services

    Send the device to your local agent, please contact your dealer. 12.4.3 Other Services You can purchase the optional accessories directly from iCarsoft’s authorized tool suppliers, and/or your local distributor or agent. Your purchase order should include the following information: ...

  • Page 97: Warranty

    14.1 Limited One Year Warranty iCarsoft Technology Inc. (the Company) warrants to the original retail purchaser of this CR Genius Diagnostic Device, that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within one (1) year period from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company’s option,...
  • Page 98 This warranty does not apply to: Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage; Products whose mechanical serial number or electronic serial number has been removed, altered or defaced; Damage from exposure to excessive temperatures or extreme environmental conditions;...
  • Page 99 Technology Inc. www.icarsoft.us www.icarsoft.com All Rights Reserved...

Table of Contents