Advertisement
Check that the deployment of the
airbag is not blocked or impaired in
any way.
Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction
cup at the bottom of the mounting
device is firmly attached to the
windscreen or dashboard, especially
if the ambient temperature changes
a lot.
Attach to a windscreen
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch
on the mounting device into the slot
at the back of the holder (see step
1A at the start of this guide). Rotate
Copyright © 2009-2010 Nokia. All rights reserved.
Never leave the mounting device
inside the vehicle in direct sunlight
or in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
When attaching a mobile holder,
ensure that the display of the
mobile device is clearly visible for
the user. For your safety, install the
holder in the upright position.
the holder clockwise about 90
degrees until it locks into place (1B).
To detach the holder from the
mounting device, rotate it
anticlockwise.
5
Advertisement
