NEC 17600SUG05 User Manual page 36

Listening to Messages
Using the Listening Options (cont'd)
To Make a Call to the
message sender
(including message
senders from other
Voice Mail systems in
the network)
32
1. Press MC (62).
You hear: Please Hold.
Then NVM-Series calls the extension
that left the message. If the message is
a network message, NVM-Series calls
the remote Automated Attendant and
dials the mailbox number that left the
message. Since in most cases the mail-
box number and extension number
match, dialing the mailbox number will
ring the corresponding extension unless
special features at the far end prevent it.
If that is the case, you will probably be
able to leave a message.
If NVM-Series has enhanced Make
Call and does not know the message
sender's extension, you can enter the
extension number that should receive
your call.
If the extension does not answer or is
busy, NVM-Series lets you record a
reply (see page 29). Or, you can simply
press to continue listening (if the mes-
sage was paused) or select another lis-
tening option.
If your phone system has Caller ID,
you may be able to use MC to reach an
outside message sender.