Table of Contents
Advertisement
Quick Links
LCD REAR PROJECT ION
MONIT OR
INSTRUCTION MANUAL
LCD PROJECT ION - MONIT OR
Special Features
LCD Rear Projection Monitor NRP-60LCD1
Wide screen with the highest picture quality! Experience the reality and feel the
amazing sensation!
•Reality and sensation experienced only in theaters!
Small crystal liquid particles compounding the wide screen LCD Projection Monitor provides a clear image and higher
quality of picture!
•Wide Screen! Minimized Space!
LCD Projection Monitor is easy to install and move around since it is much smaller and lighter compared to an original
CRT type monitor.
•Exceptionally bright engine
The LCD Rear Projection Monitor NRP-60LCD1 has improved its light source by using 130W, which makes the images of
the screen much clear and much brighter than just a normal LCD Projection Monitor.
•LCD panels of 2.76 million pixels
The LCD Rear Projection Monitor NRP-60LCD1 has three separate LCD panels of 2.76 million pixels that help to generate
sharper, clearer and brighter images.
•No magnetic influence
The LCD type Monitor is not affected by magnetic field as that of the CRT type projection monitor; thus, distortion of the
picture quality or flickering of the image does not occur. It may be used with oversized speakers, or installed in a place
where Monitor installation was previously undoable.
•Lenticular Screen
The Nec lenticular screen of 0.155mm pitch contains an anti-reflection coating that improves its contrast, and consequently,
its picture and color quality at the least parts of the edge with the 2.76 million color pixels.
•Dolby Surround Pro Logic
The LCD Rear Projection Monitor NRP-60LCD1 contains the highest quality amp, which provides the richest sound only
of Dolby Surround Pro Logic without any additional connection other than the usual speaker systems (Woofer, Surround
R, L).
This user's manual contains important safeguards and instructions that must be
followed by the user for its proper usage and maintenance.
Please read the instructions carefully, and keep the manual in a safe place for future
reference.
ACCESSORIES
MULTI
POWER
VIDEO
MEDIA
SCREEN
SCREEN
DOLBY
SOUND
MODE
SIZE
SOUND
MODE
MENU
RECALL
SLEEP
VOL
VOL
MUTE
-1-
Advertisement
Table of Contents
Related Manuals for NEC NRP-60LCD1
Summary of Contents for NEC NRP-60LCD1
-
Page 1: Special Features
CRT type monitor. •Exceptionally bright engine The LCD Rear Projection Monitor NRP-60LCD1 has improved its light source by using 130W, which makes the images of the screen much clear and much brighter than just a normal LCD Projection Monitor. •LCD panels of 2.76 million pixels The LCD Rear Projection Monitor NRP-60LCD1 has three separate LCD panels of 2.76 million pixels that help to generate... - Page 2 • Both 1080i, 720p and 480p HDTV images • VGA, S-VGA, XGA, SXGA and UXGA computer graphics HD Upgradeable With the use of an optional DTV receiver, your NEC big screen can display high definition pictures. Wide Screen Picture Format You will be able to view pictures as the movie directors intended you to see them.
-
Page 3: Important Safeguards
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... - Page 4 12. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 13. Object and Liquid Entry Never push objects of any kind into this Monitor through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock.
- Page 5 Please keep the user's manual in a safe place for future reference. Do not put volatile substance-such as Do not touch the power cord with benzene, naphtha- near the product moisturized or watery hands when since it may cause a change in the plugging to or unplugging from the product’s color.
-
Page 6: Maintenance Tips
Maintenance Tips Air Filter Cleaning Caution Unplug the power cord from the outlet before cleaning. When vacuuming the filter, please do so from the outmost surface. The Monitor set will not operate if the air filter has not been properly assembled. Change the air filter if damaged or wet. -
Page 7: Lamp Change
The screen brightness may be reduced or the light bulb may be shattered when the lamp has been used for a In this case, you must purchase the lamp DSJ-LF10 from Nec Electronics Service Center, and exchange it as the following instruction since its lifetime has been terminated. - Page 8 Loose Two Screws of the Lamp. Use a (-) driver to separate the lamp from the unit. Exchange the Lamp Exchange the lamp and re-assemble in the opposite sequence. Reset the Lamp Timer MENU Plug in the power cord into the outlet, and turn on the Monitor set either using the remote controller or the Power button.
-
Page 9: Video Connection
Video Connection Connecting with an External Source You may connect S-Video input to enjoy a clearer and brighter picture images. You can choose and make the connection with any one of Video 1,2, or 3 inputs. Connect either S-Video or Video input to the unit. When both are connected, the output display will be in S-Video. -
Page 10: Dvd Connection
DVD Connection -480i, 576i input signal is possible for DVD input. -DVD screen output is composed of three separate primary color jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players. -The DVD player s audio output must be connected to the DVD audio input socket at the back of the Monitor set. -
Page 11: Digital Satellite Receiver Connection
Digital Satellite Receiver Connection Watching High Definition Digital Broadcasting The signal input of 1080i, 720p, and 480p are available in this product. You may use a general A/V jack for its connection. VIDEO AUDIO DTV INPUT Digital Satellite Receiver LCD PROJECT ION - MONIT OR Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and... -
Page 12: Personal Computer Connection
70.0 VESA 75.0 VESA 85.0 VESA 66.0 76.0 60.0 VESA 75.0 VESA 85.0 VESA 43.4 VESA 60.0 VESA 72.0 HP&HITA 74.1 Sony&NEC 75.0 VESA 85.0 VESA 48.0 VESA 60.0 VESA 65.0 VESA 70.0 VESA 75.0 VESA 80.0 VESA 85.0 VESA... -
Page 13: Name Of Each Part
Name of Each Part Front Panel Buttons on the Monitor set have the same function as those of the remote controller. Front Panel Button If you turn the Monitor set off by pressing the main power(on/off) button at this panel, will prevent all operation of both the Monitor set and the remote controller. -
Page 14: Basic Menu
Rermote Controller Guide Parts of the remote controller VIDEO MULTI Use this function to make video input selection. POWER VIDEO MEDIA It changes in the following sequence VIDEO1 VIDEO2 VIDEO3 DVD MULTIMEDIA DVD-DTV or pc can be selected altermately. Use it when selecting DVD-DTV or pc. SCREEN SCREEN DOLBY... -
Page 15: Turning On The Monitor
To watching Monitor Turning on the Monitor Buttons on the Monitor set have the same functions as those of the remote controller. Turning on the Monitor set. Plug the power cord to the outlet and press the main power at the front controller panel. A red lamp will light up. -
Page 16: Watching Vcr
Watching VCR Please refer to the connection guide of Monitor to external input provided at the page 15~21. The input may be selected by pressing Menu Connect Either the VCR or DVD with the Monitor and Press the "VIDEO" of the Remote Controller Repeatedly. Each time the “VIDEO”... - Page 17 Screen Adjustment of DTV or PC This feature is only available when there is DTV or PC input. It provides information on the resolution and frequency, and helps adjust its positions. Displaying the Menu. Press the “menu” button MENU The following menu will appear on the screen You must operate it only when the DTV or the PC is connected.
-
Page 18: Screen Size Adjustment
Screen Size Adjustment You may change the screen size at your preference. It is more entertaining and fun watching Monitor. You may adjust it by pressing Menu Selecting Screen Size. Press the "Screen Size" button. The size and the aspect ratio of the screen that you are currently watching will be changed. - Page 19 Making Picture Adjusting You may adjust the brightness, contrast, sharpness, color and tint at your preference. Adjusts the degree of brightness or darkness of the whole screen Adjusts the degree of brightness and darkness of the objects with the background of the picture. Adjusts the shapes of the objects providing a clearer and softer image.
-
Page 20: Sound Adjustment
Sound Adjustment Adjusting the Sound Mode You may select the sound mode already provided by the factory at your preference without going through You may have this selection by pressing Menu Selecting Sound Mode. Press the "Sound Mode" button. Each time you press the button, it will be changed in the sequence of "Normal"... - Page 21 Making "Sound Adjustment" Select "Sound Adjustment" MENU pressing the “ / ” button. When the “Vol ” button is pressed, an extended menu will appear. Using Equalizer Select "Equalizer" pressing MENU buttons. “ / ” When the “Vol button is ”...
- Page 22 LCD PROJECT ION - MONIT OR Dolby Sound The original sound system has been improved, and you may hear three-dimensional, Dolby Pro Logic sound. You may have this selection by pressing <Menu> <Sound> <Pro-Logic> Choosing Dolby Pro Logic Press the "Dolby sound" button. Each time you press the button, it will be changed in the following sequence It may be adjusted by pressing Menu...
- Page 23 Speaker Sound Adjustment You may adjust the Speaker sound by pressing Menu Sound Dolby Pro Logic related sound adjustment cannot be done when the "Pro Logic Off" mode is on. Noise sequencer: When you select Menu Sound External set Noise sequencer, you will hear "noise tone"...
-
Page 24: Using The Memory Feature
Using the Memory Feature This feature makes the Monitor turn on automatically at a certain time that you set-up. You must set-up the current time before utilizing this memory feature. Displaying the Menu. Press the “menu” button MENU The following menu will appear on the screen Viewing the Sub-Items. - Page 25 Setting "Sleep Timer" This feature permits the unit to turn off automatically after 10 to 120 minutes depending on the time you set-up Using Sleep Timer Press the "Sleep" button. SLEEP Each time the "Sleep" button is pressed, the menu will change in the following sequence: "Sleep-timer off"...
-
Page 26: Selecting The On-Screen Language
Selecting the On-Screen Language The language of the program on the screen can be changed to one of the following On-Screen languages: English, Spanish, French,Portuguese, Dutch, Italian, and Russian. Press the Menu button The following screen will be displayed. MENU Select Utilities by pressing the Up/Down buttons. -
Page 27: Troubleshootings
Troubleshootings Symptoms and Solutions Please check the following list prior to calling Nec Service Center for assistance Is the Monitor power cord Has the "mute" button at the plugged into the outlet remote controller been pressed correctly? accidentally? Please check the power cord... -
Page 28: Nec Service Centres
84A Richmond Rd, Keswick, 5053 Western Australia Perth 45 Sarich Court, Osborne Park 6017 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorized NEC Service Centre. NEC Australia Pty. Ltd. 244 Beecroft Road EPPING 2121 Tel.