How To Use The Fitness Mirror - NordicTrack VAULT User Manual

HOW TO USE THE FITNESS MIRROR

HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the fitness mirror has been exposed
to cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter (A).
If you do not do this, you may damage the tablet
displays or other electronic components.
IMPORTANT: Always plug the power adapter (A)
into the fitness mirror before you plug it into an
outlet.
Plug the power
adapter (A) into
the receptacle
on the fitness
mirror (see
assembly step 7
on page 10).
Then, plug the
power adapter
into an appropri-
ate outlet that is properly installed in accordance with
all local codes and ordinances.
HOW TO USE THE LATCH
Make sure that
the door is
securely latched
when the fitness
mirror is not
in use. To latch
the door, simply
pivot the latch
(B) on the top of
the cabinet until
it catches the
screw (C) in the
top of the door.
A
B
C
HOW TO ADJUST THE SHELVES AND RACKS
Depending on the model, a variety of shelves and
racks are included with the fitness mirror.
To adjust the
shelves (D) and
racks (E, F) in
the cabinet, first
open the door
and remove the
shelves, racks,
and hangers (G)
that are already
installed, if nec-
essary. It may
be helpful to use
a rubber mallet
to remove the
hangers.
Counting from
the top or the
bottom of the
cabinet, insert
a left hanger
(G) and a right
hanger (not
shown) into the
desired adjust-
ment holes (H).
Make sure that
the left and right
hangers are
set at the same
height.
Then, press a shelf (D) or a rack (E, F) firmly into place
over the hangers (G); it may be helpful to use a rubber
mallet. Orient a shelf so that the tabs face downward
and the lip faces upward at the front; orient a slotted
shelf so that the slots face outward and the lip faces
upward at the front.
Repeat this process to attach as many shelves (D)
and/or racks (E, F) as desired.
11
H
D
G
E
G
F
G
F
G
H