Predefined Standard Program - Haefely AXOS User Manual

Touch calibration
After setting has been finished the "Setup" gets closed when pressing the "close" button.
Afterwards the starting window gets displayed. It can be selected between Surge, EFT/Burst,
Voltage Dips, Magnetic field, Ring Wave and Telecom Wave.
6.3.1

Predefined standard program

The AXOS8 contains predefined standards test for Surge, EFT/Burst, Voltage Dips, Magnetic
field, Ring Wave and Telecom Wave according to each particular norm. Each test can be selected
and applied through the generator to the EUT. The Figure 6-4 Save and load option of data
reflects the different option of managing the data at the "Surge" generator for example. These
application works similar for any other impulse generator. The basic operation is similar to normal
office applications. Data can be operated as followed: "load", "Save", "Save as", "Copy" and
"Delete". Those options occur on the screen, when "file" button is pushed.
Two directories can be selected as shown in Figure 6-5
the "standard" directory can only read and load the predefined test procedure in accordance to
the particular norm. The second directory is "Internal". The internal data (customized testing files)
can be saved, loaded and deleted. Either of the directories can only be accessed out of the
particular menu, like for instance the "surge" generator.
In addition, the loaded program is displayed in the upper line in either of the standard and pre-
compliance menu.
32
In normal delivery mode there is a pre-calibration of the touch screen. However, if
required, please follow and press for few seconds with a pen the cross at the screen. It
requires five different
positions. Then confirming and as a control measure four different yellow dots get open.
Again confirming and the calibration has finished.
Figure 6-4 Save and load option of data
Operating Instructions
File selection Internal/Standard. However,