Training Quick Reference
Set phone keypad tones to normal tones. (Refer to phone user's guide for information
1
about defining keypad tones.)
If Bluetooth Button E does not flash, press it to establish a Bluetooth link.
Press, hold Voice Recognition Button until it flashes.
2
Train car kit by using commands described below.
3
Exit Training Mode: Press, release Voice Recognition Button.
4
Record Key Word
H
# 2 #
F
Say a name
(speak clearly)
G
Motorola
(for example)
F
Repeat
G
Motorola
F
Motorola stored
Record Name
H
# 8 #
F
Say a name
(speak clearly)
G
John Smith
F
Repeat
G
John Smith
F
Press the number, star to end
H
number to store, then *
F
John Smith Stored
Delete/Browse
H
# 3 #
F
Say a name, press 9 to delete
G
John Smith
(name you want to delete)
F
John Smith, press 9 to delete
G
9 (John Smith name and phone number
deleted)
H
# (hear next name)
* (hear previous name)
Key Word On/Off
H
# 6 #
F
On
H
# 6 #
F
Off
Related Information
F
Repeat
(confirm first entry or when car
kit cannot distinguish key word)
F
Aborting
(if nothing said for 10 seconds)
Note: Turn off vehicle to reduce noise while
recording.
Related Information
F
Repeat
(when car kit cannot distinguish
key word)
F
Aborting
(if nothing said for 10 seconds)
F
Memory full
(if more than 30 names
stored or 30 s. recorded)
H
C (clear last digit—not on all phones)
H
C (press and hold to erase phone
number and cancel)
Note: Turn off vehicle to reduce noise while
recording.
Related Information
F
Aborting
(if nothing said for 10 seconds)
Note: Turn off vehicle to reduce noise while
recording.
Related Information
Key to Symbols
H
Press the following
key(s) or enter the
following information
F
Car kit says ...
G
You say ...
17