Analog Devices MAX98365 Manual

Evaluates: MAX98365A/MAX98365B/
MAX98365C/MAX98365D
General Description
The MAX98365 evaluation system (EV system) is a
fully assembled and tested system that evaluates the
MAX98365A/B/C/D mono Class-D audio amplifier. The
EV system consists of the MAX98365 Development
Board (DEV board), Maxim's Audio Interface Board III
(AUDINT3), and a USB cable.
It is recommended that the DEV board be evaluated with
the AUDINT3 board, as an EV system. MAX98365A and
MAX98365C support the standard I
MAX98365B and MAX98365D support standard left-jus-
tified mode. All MAX98365 variants support an 8-channel
TDM digital audio interface.
The AUDINT3 board provides a USB-to-PCM interface
in addition to a 1.8V VDD supply needed to evaluate the
DEV board. The MAX98365 DEV board requires one
additional supply input, 3V to 14V (PVDD) when evaluat-
ing using the AUDINT3 board.
board and the AUDINT3 board.
Figure 1. MAX98365 Evaluation System
©
2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A.
Click here
2
S interface, and
Figure 1 details the DEV
| Tel: 781.329.4700
to ask an associate for production status of specific part numbers.
MAX98365 Evaluation Systems
Features
● 3V to 14V Single-Supply Operation
2
● I S, Left-Justified, or TDM Input
● Five Selectable Gains (9.5dB, 12.5dB, 15.5dB,
18.5dB, and 21.5dB)
● Audio Channel Select (Left, Right, and Mono Mix)
● Filter-Less Operation
● Low EMI
● Complete Hardware System with Easy Setup; No
Tools or Special Software Required
EV System Contents
● MAX98365 Development Board
● Audio Interface Board III
● Micro-USB Cable
Ordering Information appears at end of data sheet.
| © 2022 Analog Devices, Inc. All rights reserved.
319-100884; Rev 0; 2/22