Removing
efficiently allergens
Allergen
⇒
mode
the source of allergens
●
Removing
home dust quickly
Hi
⇒
Quiet operation
at night
Lo
⇒
・
Performance of the pollutant sensor might be affected nearby operating humidifier,
Note:
heater, oil fumes source or external polluted environment.
・
The pollutant sensor detects cigarette, kitchen, and other odors.
It cannot detect pollen and other types of house dust. For pollen and dust,
・
set the unit in continuous operation mode (either "Hi" or "Med").
When the unit is running, minus ions are emitted from the air outlet.
●
(The minus ion indicator will come on.)
・
Minus ion are microscopic particles that create a negative electrical field in the air.
They are produced in abundance in natural settings such as forests and waterfalls.
A "beep" will sound when changing the operation mode.
●
If not using the air purifier for a long period of time, turn it off and disconnect the power plug
Important:
●
from the wall socket to save electricity.
(The air purifier will consume approximately 1.4W of power even when unit is turned off.)
Hi
→
Approximately 30 minutes
15 minutes
Removes dust and
If pollutants are detected while the unit is off, it will automatically come on
with a fan speed of "Lo".
(Operation indicators)
Either Lo or Hi
will be lit red,
Off
Lo
Off
→
→
16 minutes
15 minutes
The on / off cycle is repeated to maintain
clean air in the room.
Repeated over a 24-hour cycle
(Operation indicators)
Continuous operation
(Operation indicators)
Continuous operation
(Red)
(orange)
or off.
Lo
→
→
→
...
16 minutes
15 minutes
(Red)
Off
9