Table of Contents
Advertisement
Manual Mode – Quick Guide: Running Samples
4. Open the manual magazine holder cover, pullout the holder and load the magazine. You can
load either sections or both if required. The left hand-side magazine will be processed first.
5. Push the magazine hold back into the analyser and close the magazine holder cover.
6. Select [Mode] from the status area. The [Preparation Mode] dialog box will open. Select
[Staining] followed by [OK].
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk·
www.sysmex.co.uk
57
- Quick Links:
- Sp-50 Overview
- Responding to Alarms
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SP-50 and is the answer not in the manual?
Questions and answers
how do you execute error reset for suspended shutdown
We have had a problem with water on the slides on our SP50 on a friday. The engineer recommended to refill reagent bath every 8 hrs. Is this for the undiluted, diluted or all?
CONVEYOR ERROR