Nokia Bts Manager; Environmental Precautions; Power Supply Precautions - Nokia MetroSite Maintenance Manual

2.2.1

Nokia BTS Manager

When replacing or adding units, Nokia BTS Manager software is used for local
management of the BTS. Instructions for running specific maintenance
operations with Nokia BTS Manager are included in the relevant sections of this
document.
For more general information on using Nokia BTS Manager, refer to Nokia
MetroSite EDGE Base Station: Commissioning.
2.3

Environmental precautions

When the cover of the Nokia MetroSite EDGE Base Station is removed to allow
for maintenance work, the following conditions must be considered:
1.
2.
2.4

Power supply precautions

WARNING
Potentially lethal voltages!
The BTS power must be switched OFF at the main disconnect device or
circuit breaker before starting maintenance work which involves the risk of
electric shocks.
When working inside the BTS cabinet, prevent injury to personnel or damage to
the BTS equipment by following the requirements presented in Table .
14 (52) © Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Rain or snow must not be allowed to fall on the internal surfaces of the
equipment.
The cover must not be removed during conditions where dust can be blown
into the cabinet.
Draft
Maintenance
DN9913495
Issue 3-0 en