Mode Functions - DeWalt DXFRS300 Instruction Manual

Call Button
Press and release the Call/Lock button.
Call Button
The other person will hear a three second call
tone. This tone is used only to establish voice
communications.
Auto Squelch
Your radio will automatically shut off weak transmissions and unwanted
noise due to terrain, conditions limit.
Lock Function
The Lock function locks the Up, Down and Mode
Lock Button
buttons to prevent accidental operation.
To turn the lock on or off:
– Press and hold the Call/Lock button for two seconds.
Lock Icon
A double beep sound is used to confirm your lock
enabled. When in Lock mode, the Lock icon will be
displayed also.
Range
Your range will vary depending on terrain and
conditions.
In flat, open country your radio will operate at
maximum range.
Buildings and foliage in the path of the signal can
reduce the range of the radio.
Dense foliage and hilly terrain will further reduce the
range of the radio.
On Channels 8 through 14, your radio automatically
switches to low power, which will limit the range the
radio can communicate.
5
Operation

Mode Functions

Scrolling Through the Mode Function
By scrolling through the Mode function, you will be able to select or turn on
preferred features of your radio. When scrolling through the Mode function,
your radio features will be displayed in the same predetermined order:
Mode Button
Channel 22 channels with default privacy code
VOX on/off On or off shown on LCD
VOX sensitivity 5 levels
Vibration Alert selection 0:Off, 1:Enable
CTCSS code setting 38 codes for setting
DCS code setting 83 codes for setting
6