Volume Control - Doro Congress 100 Quick Manual

English

Volume control

The volume level in the earpiece can be increased or decreased using the volume
buttons during a call (5 steps). Use the volume up button
volume and the volume down button
Ringer
1. Lift the receiver (ignore the dialling tone) and press the store button
2. Select ring signal by pressing the number keys
table below.
3. Press store button
Key/setting
1 . ......................................... Melody A . ....................... Low
2 . ......................................... Melody A . ....................... Normal
3 . ......................................... Melody A . ....................... High
4 . ......................................... Melody B . ....................... Low
5 . ......................................... Melody B . ....................... Normal
6 (factory setting) . ............... Melody B . ....................... High
7 . ......................................... Melody C ....................... Low
8 . ......................................... Melody C ....................... Normal
9 . ......................................... Melody C ....................... High
0 . ......................................... Off * ............................... -
* If the key 0 is selected, the ring signal will be turned off until the next time the receiver is
lifted. After that, the ring signal will revert to the previous setting.
EN 4
Settings
£
and replace the receiver. The ring signal is now set.
P
Melody type
$
to decrease the volume.
- in accordance with the
0 9
Ringer level
to increase the
and
#
P
www.doro.com
.