Acquiring A Scan With Fuel3D Studio - Fuel3D SCANIFY F3D2001 User Manual

Acquiring a scan with Fuel3D Studio

Launching the View Finder
You can open the View Finder by selecting the 'Launch View Finder' button that is located
below your list of projects.
'Launch View Finder' button
The View Finder will then display a live view from the scanner.
Target tracking in the View Finder
The target is required to take a scan. The View Finder has a tracking capability and displays
to you, via a ring around the target, the distance that you are away from the subject.
There are three color modes used while tracking:
Red – Too far away from Green – Perfect distance White – Too close to the
the target (> target (< 35cm/13.7")
from the target.
45cm/17.7")
(35cm/13.7" –
45cm/17.7")
8