Dkc55Rcd - Yamaha disklavier Mark III Series Maintenance Handbook

DKC55RCD

Control Unit — Front Panel
2 3
1
PLAY/PAUSE
STANDBY
ON
0
1 [STANDBY / ON] button
Turns on the Disklavier or puts it in Standby mode.
Press once to turn it on, and once again to put it in
Standby mode.
Note: In Standby mode, the Control Unit is in effect
turned off. However, electrically it is in a state in
which a very small quantity of power is being
consumed, as the MAINS switch is still on and
the Disklavier is still connected to the AC power
receptacle.
2 Remote control sensor
When using the remote control, point it toward this sen-
sor.
3 Display (LCD)
Shows various information.
4 DRIVE indicator
Indicates the selected disk.
5 [SELECT] buttons
Used to select a disk. Toggles the floppy disk, CD, and
Memory Disks (0 ~ 9 and A ~ F).
6 CD drive
Insert a PianoSoft.PlusAudio or other audio or audio/
MIDI CD here.
7 CD eject button
Used to open the CD drive.
8 Floppy disk drive
Insert a floppy disk here.
9 Floppy disk eject button
Used to eject the disk from the floppy disk drive.
0 PLAY/PAUSE] button
Used to start and pause playback.
A [STOP] button
Used to stop playback and recording.
4
5 6
SELECT
DRIVE
CONTROL UNIT DKC55RCD
STOP REC SONG SELECT/REV • FWD
PART
L
A B C D
8
7
GENERAL
INSTRUMENT
ENTER
METRO-
VOICE FUNC.
NOME
R
E F GH I
B [REC] button
Used to engage the Record Standby mode before record-
ing starts.
C [SONG SELECT/REV•FWD] buttons
In Stop mode: Used to select songs.
In Play mode: Used to fast preview and review.
In Pause mode: Used to fast forward and reverse.
D PART [L] [R] buttons
For L/R and Ensemble songs, these buttons allow you to
choose which part to play back or record: L (left-hand)
part, R (right-hand) part, or both.
The indicators light in green during playback and in red
during recording.
Press both buttons together to turn pedal playback on or
off so that you can play the pedals yourself.
E [ENTER] button
Used to select and execute functions.
F [VOICE] button
Used to access the internal XG tone generator when
playing the piano.
G [ ] [ ] cursor buttons
Used to move the cursor in the display.
H [FUNC.] button
Used to access various Disklavier utility functions.
I [METRONOME] button
Used to access the metronome.
J Selector button
Used to select the feature you want to adjust from among
Volume, Tempo, Tranpose, and Balance.
K [–/NO] [+/YES] buttons
Used to select options and parameters and to adjust the
volume.
L LED volume level indicators
Indicates the playback volume level.
Also functions as a visual metronome.
6
9
VOLUME –10 –8 –6 –4 –2 0
• • •
TEMPO
–/NO +/YES
TRANSPOSE
BALANCE
J K L