Panasonic PV-DF2002 Service Manual page 7

Hide thumbs Also See for PV-DF2002:

5.1.3 HOW TO UPDATE THE FIRMWARE

OF DVD

TOP PREVIOUS NEXT

It is possible to update the firmware version of the DVD Drive and the DVD Decoder using each

Firmware Disc for DVD Drive and DVD Decoder.

5.1.3.1 How to update the firmware of DVD

1. Confirm the firmware version of DVD Drive. Refer to "

FUNCTION FOR DVD

2. Set the unit to DVD mode.

3. Press OPEN/CLOSE button to open the tray. Then, place the Firmware Disc for DVD Drive in

the tray.

4. Close the tray. Updating will begin automatically.

5. After approx. 1 minute, the tray will open automatically.

Note:

If the tray has still not opened after 3 minutes or Error Indication appears, updating was

unsuccessful. In this case, repeat above steps from step 1.

6. Remove the Firmware Disc from the tray. Then, disconnect the AC Plug. (The tray will not

close.)

7. Connect the AC Plug and turn on the power. Then, reset all VCR memory. Refer to "

TO RESET ALL COMBINATION DVD VCR MEMORY FUNCTIONS

5.1.3.2 How to update the firmware of DVD Decoder:

1. Confirm the firmware version of DVD Decoder. Refer to "

FUNCTION FOR DVD

2. Set the unit to DVD mode.

3. Press OPEN/CLOSE button to open the tray. Then, place the Firmware Disc for DVD Decoder

in the tray.

4. Close the tray. Updating will begin automatically.

5. After approx. 1 minute, the tray will open automatically.

Note:

If the tray has still not opened after 3 minutes or Error Indication appears, updating was

http://servis-manual.com/

SELF-DIAGNOSTIC TEST

HOW

Table of Contents