Zoom iQ6 Operation Manual

OPERATION MANUAL
© 2014 ZOOM CORPORATION
Copying or reproduction of this document in whole or in part without permission is prohibited.
Thank you very much for purchasing the ZOOM
The has the following features.
• High quality mic that connects with iPhones, iPods and iPads
This stereo microphone can be connected to an iPhone (5 or later), iPod touch (5th
generation), iPad (4th generation), iPad Air or iPad mini and used with an application that
supports mic input to record high-quality audio.
Note: In this manual, we refer to all of these devices as "the connected device" or "the iOS device. "
• X/Y mic format allows adjustment of the recording angle
The X/Y mic format uses two crossed unidirectional mics and allows you to record audio
sources in a targeted field as a stereo image that has depth. You can set the recording
angle to 90° or 120° by turning the mics.
• High-performance app for use with the mic
Download the free application from the App Store and use it with the
example, set the recording format, edit audio files and apply various effects.
• Audio monitoring without latency (only when using the ZOOM
app)
Using latency-free direct monitoring, the audio input through the
directly from the stereo mini jack without passing through the connected iOS device.
• Recording level can be adjusted directly from the
The dial on the can be used to adjust the recording level.
• Usable even with devices in cases
By removing the included case adjuster, you can connect this mic to a device even when
it is in a case.
Specifications
Microphone Type
Maximum input sound pressure 130dBspl
Input gain +11 - +51dB
Audio quality 44.1kHz/16bit, 48kHz/16bit
Power Powered by the connected device
Connector Lightning connector
Stereo mini jack (combined headphone/line level output)
Dimensions 61.1 (W) x 30.6 (D) x 53.1 (H) mm
Weight 28.8g
Compatible devices iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPod touch (5th generation),
iPad (4th generation), iPad Air, iPad Air 2, iPad mini, iPad mini 2, iPad mini 3
Supported operating iOS 6.0 or newer
systems
.
Copying or reproduction of this document in whole or in part without permission is prohibited.
Thank you very much for purchasing the ZOOM
The has the following features.
• High quality mic that connects with iPhones, iPods and iPads
This stereo microphone can be connected to an iPhone (5 or later), iPod touch (5th
generation), iPad (4th generation), iPad Air or iPad mini and used with an application that
supports mic input to record high-quality audio.
to, for
Note: In this manual, we refer to all of these devices as "the connected device" or "the iOS device. "
• X/Y mic format allows adjustment of the recording angle
can be output
The X/Y mic format uses two crossed unidirectional mics and allows you to record audio
sources in a targeted field as a stereo image that has depth. You can set the recording
angle to 90° or 120° by turning the mics.
• High-performance app for use with the mic
Download the free application from the App Store and use it with the
example, set the recording format, edit audio files and apply various effects.
• Audio monitoring without latency (only when using the ZOOM
Unidirectional
X/Y stereo mic (90°/120°)
app)
Using latency-free direct monitoring, the audio input through the
directly from the stereo mini jack without passing through the connected iOS device.
• Recording level can be adjusted directly from the
The dial on the can be used to adjust the recording level.
• Usable even with devices in cases
By removing the included case adjuster, you can connect this mic to a device even when
it is in a case.
Specifications
Microphone Type
Maximum input sound pressure 130dBspl
Input gain +11 - +51dB
Audio quality 44.1kHz/16bit, 48kHz/16bit
Power Powered by the connected device
Connector Lightning connector
Stereo mini jack (combined headphone/line level output)
Dimensions 61.1 (W) x 30.6 (D) x 53.1 (H) mm
Weight 28.8g
Compatible devices iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPod touch (5th generation),
iPad (4th generation), iPad Air, iPad Air 2, iPad mini, iPad mini 2, iPad mini 3
Supported operating iOS 6.0 or newer
systems
Have questions or need help?
Email custserv@demco.com or call 800.356.1200
Usage and Safety Precautions
SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions that you must read to prevent accidents.
The meanings of these symbols are as follows:
Something that could cause serious injury or death.
Warning
Something that could cause injury or damage to the equipment.
Caution
Other symbols
Required (mandatory) actions
Prohibited actions
Alterations
Never open the case or attempt to modify the product.
Product handling
Do not drop, bump or apply excessive force to the unit.
OPERATION MANUAL
Be careful not to allow foreign objects or liquids to enter the unit.
Operating environment
Do not use in extremely high or low temperatures.
© 2014 ZOOM CORPORATION
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or near splashing water.
Do not use in places with excessive vibrations.
Do not use in places with excessive dust or sand.
Precaution when using the connectors
Before moving the device, always disconnect all the connectors.
Usage Precautions
Interference with other electrical equipment
In consideration of safety, the has been designed to minimize the emission of electromagnetic radia-
tion from the device and to minimize external electromagnetic interference. However, equipment that is
very susceptible to interference or that emits powerful electromagnetic waves could result in interference
if placed nearby. If this occurs, place the
With any type of electronic device that uses digital control, including the
could cause malfunction, corrupt or destroy data and result in other unexpected trouble. Always use caution.
Cleaning
Use a soft cloth to clean the panels of the unit if they become dirty. If necessary, use a damp cloth
that has been wrung out well. Never use abrasive cleansers, wax or solvents, including alcohol, benzene and
paint thinner.
Malfunction
If a malfunction or something unexpected occurs, disconnect the
as soon as possible. Contact the store where you bought the unit or ZOOM service with the following informa-
tion: product model, serial number and specific symptoms of failure or malfunction, along with your name,
address and telephone number.
Copyrights
• iPad, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
iPad mini, and Lightning are trademarks of Apple Inc.
• All other trademarks, product names and company names mentioned in this documentation are the property
of their respective owners.
Note: All trademarks and registered trademarks mentioned in this manual are for identification purposes only
and are not intended to infringe on the copyrights of their respective owners.
• Recording for any purpose other than personal use from copyrighted sources, including CDs, records, tapes,
live performances, video works and broadcasts, without permission of the copyright holder is prohibited by law.
Zoom Corporation will not assume any responsibility related to infringements of copyrights.
"Made for iPod" , "Made for iPhone" , and "Made for iPad" mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad, respectively and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
FCC regulation warning (for U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
This product compiles with the requirements of EMC Directive 2004/108/EC and Low
Voltage Directive 2006/95/EC and ErP Directive 2009/125/EC and RoHS Directive 2011/65/EU
Unidirectional
X/Y stereo mic (90°/120°)
Warning
Warning
Precautions
Warning
.
and the other device farther apart.
, electromagnetic interference
and connection cables
to, for
can be output
In this manual, symbols are us
The meanings of these symbol
Part Names
Something that cou
Warning
Something that cou
Caution
Other symbols
Required (mandato
Prohibited actions
Alterations
Level indicator
Never open the case o
Stereo mini jack Lightning connecto
Product handling
X/Y stereo mic: This is an X/Y format stereo mic.
You can set the recording angle to 90° or 120° by
Do not drop, bump or
turning the individual mics. (See "Adjusting the
stereo width. " )
Be careful not to allow
Stereo mini jack: Connect headphones to
monitor recording and playback. This can also be Operating environment
used as a line output jack.
Do not use in extremel
MIC GAIN knob: Use to adjust the recording
level manually. (See "Adjusting the recording
Do not use near heater
level. " )
Level indicator: The red LED lights dimly when
Do not use in very high
connection with the device is normal. The LEDs
Do not use in places w
Connecting with the Device
1. Do not use in places w
Connect the to the device w
Precaution when using the
lighting connector.
Before moving the dev
When the connected device is providing pow
the red LED lights dimly.
The becomes ready for use when
or another app that can use it is started.
Interference with other elec
In consideration of safety, the
tion from the device and to m
very susceptible to interferen
if placed nearby. If this occurs,
With any type of electronic dev
could cause malfunction, corru
Cleaning
Use a soft cloth to
that has been wrung out well.
NOTE paint thinner.
Malfunction If a malfunction
• The lightning connector does not have a front or back
compared to the illustration above, the left and right
as soon as possible. Contact th
* The left and right stereo settings can be re
tion: product model, serial num
is stored in the itself.
address and telephone number
HINT
Copyrights
If an authentication error or other problem oc
• iPad, iPhone, iPod and iPod tou
iPad mini, and Lightning are trad
2.
Connect headphones, for example
• All other trademarks, product
of their respective owners.
Use the app to adj
connected to the stereo mini jack.
Note: All trademarks and regis
The volume level set using the
and are not intended to infringe
applied when using the with other
• Recording for any purpose ot
live performances, video works
Zoom Corporation will not assu
"Made for iPod" , "Made for iPh
to connect specifically to iPod,
Apple performance standards.
safety and regulatory standards
wireless performance.
FCC regulation warning (fo
This equipment has be
15 of the FCC Rules. T
in a residential installa
installed and used in accordance w
there is no guarantee that interfere
ence to radio or television receptio
to try to correct the interference b
• Reorient or relocate the recei
• Increase the separation betw
• Connect the equipment to an
• Consult the dealer or an expe
Declaration of Conformity
Thi
Voltage Directive 2006/95/EC and ErP