Explaining The Signal Alert Symbol On The Device; Intended Use; General Information On The Intended Use; Spare Parts, Accessories And Wear Parts - Bosch rexroth ctrlX CORE Operating Manual

10 / 50
Power connector, 24 V
3.4

Explaining the signal alert symbol on the device

If this symbol is on your device, you have to observe the documentation on the device.
The respective documentation informs on the type of hazard as well as the steps
required to avoid this hazard.
4

Intended use

4.1

General information on the intended use

NOTICE
Typical areas of application of the control:
•
Handling and assembly systems
•
Packaging and food processing machines
•
Printing and paper converting machines
•
Machine tools
•
Wood working machines
•
General mechanical engineering
•
Building automation
WARNING
5

Spare parts, accessories and wear parts

5.1 Power connector, 24 V
Ordering code
XACC-1-CSPWRC
XACC-1-CSPWRM
Bosch Rexroth AG
Risk of damaging the device if not expressly stated accessories, mounting
parts and other components, cables, lines, software and firmware are used.
The ctrlX CORE control may only be used with the accessories and mounting
parts listed in this documentation. Components that are not expressly men-
tioned must neither be attached nor connected. The same applies to cables
and lines.
Only to be operated with the component configurations and combinations
expressly defined and with the software and firmware specified in the corre-
sponding functional description.
Danger due to unintended use
The protection specified by Bosch Rexroth cannot be ensured if not used as
intended.
−
Use the product exclusively as intended by Bosch Rexroth.
−
Operate this device only under the mounting and installation conditions,
in the position and under the ambient conditions (temperature, degree
of protection, humidity, EMC etc.) specified in this documentation.
Part number
R911410559
R911416670
Description
24 V plug for ctrlX CORE X2 and ctrlX CORE X3
24 V plug for ctrlX CORE X3
ctrlX CORE
PLUS
R911405645, Edition 05