Fm Radio Operation; Tuning In A Station - JVC BOOMBLASTER XS-D528BE Instruction Manual

FM Radio Operation

GB
• The search may not stop at a station with a very weak signal.
• If reception is poor, move the unit to a stronger signal location.
Press SOURCE button repeatedly to select the tuner source. The display will show "TUNER".

Tuning in a Station

Auto Tuning
1. Press and hold
tuning.
2. The searched radio stations will be stored as preset station.
The search may not stop at a station with a very weak signal.
Manual Tuning
Press and hold
show the frequency being searched. Once a station has been found, the scanning will stop
automatically.
With FM radio it may be necessary to fine tune each station by pressing
Each press will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the aerial
or try moving the radio to another location.
14
button to start auto tuning. Press
or button to start the forward or reverse scanning. The display will
button again to stop the auto
or
button repeatedly.