Tools Needed For Installation And Service; Hardware Needed For Installation - Pioneer APPLI-PRO DASIC Manual

INTRODUCTION
The Appli-Pro Basic Application System was built for Pioneer Hi-Bred International, Inc. by a

leading agricultural manufacturer. The Basic is an integrated system, designed and calibrated
specifically for Pioneer
advantages:
 Appli-Pro Basic 12G treats up to 200 tons with 12 gallons of water
 Appli-Pro Basic 25G treats up to 200 tons with 25 gallons of water
 Appli-Pro Basic 55G treats up to 440 tons with 55 gallons of water
 Simple design with reliable components
 The system has a strainer in the feed line and all nozzles have stainless steel insert tips
 Well suited for small operations
 Offered in two tank sizes: 25 or 55 gallon

TOOLS NEEDED FOR INSTALLATION AND SERVICE

 7/16" Wrench and Sockets
 1/2" Wrench and Sockets
 9/16" Wrench and Sockets
 Hose Cutter
 Side Cutter
 Flat Screw Driver
 Drill and Bits
HARDWARE NEEDED FOR INSTALLATION AND NOT INCLUDED
 Some hardware is included, but you may need additional hardware depending on the machine
that you are mounting it to
® brand products. This unique system was developed to offer you the following
3