Turn The Tv On From Standby Mode - JVC 0402-Ki-NV-JMT Instruction Manual

Remote control buttons and functions
TV/VIDEO
ZOOM SPATIALIZER
1
4
7
RETURN
PIP
POSITION
FREEZE
SYSTEM
COLOUR SOUND
8
POWER
PICTURE
BASS MODE
2 3
5 6
8 9
0
MULTI
MUTING
NEXT
SUB-P
PIP
SWAP
STROBE
MENU/
OK
DISPLAY

Turn the TV on from standby mode

Press the POWER button.
The POWER lamp lights red to green and your TV will be
turned on.
• You can turn on the TV from the standby mode by
pressing the TV/VIDEO button, the CHANNEL -/+
buttons or the number buttons.
To turn the TV off:
Press the POWER button again.
The POWER lamp changes from green to red and the TV
enters standby mode.
Choose a TV channel
Choose a programme number in which a TV channel has
been set.
Press the CHANNEL-/+ buttons or enter the
programme number (PR) with the number
buttons.
• If you want to put a two-digit channel into the TV,
press the -/--button to change to the two-digit entry
system.
• You can select a channel from the PR LIST. For
details, see "DISPLAY button" on page 11.
• If you do not have a clear picture or no colour
appears, follow the operation procedure "COLOUR
SYSTEM button" on page 11.
• If you cannot hear sound normally even when the
picture appears normally, follow the operation
procedure "SOUND SYSTEM button" on page 12.
Adjust the volume
Press the VOLUME-/+ buttons.
• You cannot adjust the volume of your headphones.
Follow the operation procedure "HEADPHONE" on
page 23.