Download Print this page

GE GPF325 Series Installation Instructions Manual page 2

1/4" custom dishwasher door and access panel kit

Advertisement

Available languages

Available languages

2 RETIRE EL CONJUNTO DEL
PANEL DE ACCESO INFERIOR
• Remove the two screws below the access
panel. Retain screws.
• Loosen the two screws located between the
door and the access panel. Do not attempt
to remove these screws. They are secured
to the access panel with washers.
• Remove the access panel assembly from
the dishwasher.
• Remove the toekick and set aside.
NOTE: Do not remove the insulation behind
the access panel or toekick.
3 INSTALL DOOR PANEL TRIM
AND CUSTOM PANEL
• Remove the protective plastic covering
from side trim pieces.
A
• Place bottom trim against the bottom
of the door panel and drive center
screw, then left and right screws.
B
"Z" Trim
• Slide "Z" shaped trim under the
escutcheon.
2
Escutcheon
Escutcheon
Door
Door
Panel
Panel
Loosen 2 Screws
Loosen 2 Screws
Access Panel
Access Panel
Toekick
Toekick

Advertisement

loading

This manual is also suitable for:

Gpf325aGpf325bGpf325cGpf325w