Display Install Clock Backup Battery Using The Remote Control Unit Install/Replace the Remote Control Battery To check for iPod compatibility Setting Up the iH120 Setting Time and Calendar Using the Alarm Charging your iPod Listening to iPod Listening to non-docking iPod or other portable audio devices...
Page 3
A Consumer Guide to Product Safety This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
Quick Start 1:power Attach AC adaptor cable to DC jack on back of the iH120 and plug the other end into a wall socket. thin iPod with video (30 GB) Use this insert Insert 9 thin (30 GB) iPod with video...
Time Display Alarm Time Indicator The iH120 uses 2 alkaline “AA” batteries to provide continuous alarm operation and clock settings in the event of a power failure. If the backup batteries have been installed and a power failure occurs or the AC cord is accidentally discon- nected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained.
Note: Make sure you dispose of batteries properly (see your local regulations). The Remote Control controls basic functions on the iH120 and certain iPod functions when the iPod is docked in the iH120. For best results, aim remote control towards the remote sensor on the upper left corner of the unit.
Press the Clock Adj Button again (or if no button is pressed within 10 seconds) to exit the time and date setting mode. Two beeps will confirm clock setting is completed. Setting Up the iH120 Button to select your time zone.
Snooze can be press several times during the 1 hour alarm cycle. Sure Alarm The iH120 has a sure alarm feature. If backup batteries are installed (see page 3) the buzzer alarm will still sound in the event of a power failure.
Your iPod will continue charging while in the dock. Listening to non-docking iPod or other portable audio devices If you are using an iPod without a docking port or other MP3 player or portable audio device, you can play it through the iH120 via the Line-in Jack.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Please refer to your iPod manual for details on iPod operation. iH120 cannot control those iPods or other devices. Remove your iPod from the connector and check for any obstruction on the connectors in the dock and on your iPod.
Shuffle, intente bajar el volumen de su aparato. También intente apagar el amplificador de bajos Reemplace las baterías por nuevas Apunte el control remoto hacia el iH120 y manténgase a una distancia máxima de 10 pies de la unidad. Solución...
Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.
Need help?
Do you have a question about the iH120 and is the answer not in the manual?
Questions and answers