Panasonic ET-DFD95 Installation Instructions Manual page 10

Assembly process
2. Mount the lower projector in the base frame.
Adjusting leg
Flat washer (M10)
Spring washer (M10)
Hex bolt (M10x60)
10
(continued)
Lower projector
[1] Attach the dual bracket to the projector's lower side.
Place the lower of the two DLP(TM) Projectors on a
soft cloth with the bottom facing upward.
[2] Remove the 4 adjustment legs by turning them anti-
clockwise.
Note:
When use the projector is PT-D9510U, PT-D9510E, PT-
D9610U or PT-D9610E remove the handle and four
spacers,unscrewing the four allen hex socket bolts
(M10 x 35) fixing it as shown down.
[3] Turn the DLP(TM) Projector right side up.
[4] Place the DLP TM Projector on the base frame
assembled in step 1. Fix the projector in place from
under the base frame by inserting the flat washer
(M10), spring washer (M10) and hex bolt (M10x60)
into the adjustment leg holes, as shown in the
diagram.
Allen hex socket
Handle
bolts(M10x35)
Spacer
Projector