Technical Data - Husqvarna 125E Operator's Manual

Technical data

Engine
Cylinder volume, cu.in./cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, hp/kW
Catalytic converter muffler
Speed- -regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/liter
Weight
Weight without fuel, cutting attachment and guard, lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3- -1997, dB(A),
min/max:
Vibration levels
Vibration levels at handles, measured according to ANSI
2
B175.3- -1997, m/s
At idle, left/right handles:
At max. speed, left/right handles:
Note 1: Equivalent noise pressure level is calculated as the time- -weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all
the machine's approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 125E (M10 LH arbor shaft thread)
Cutting equipment
Blade
Blade guard kit
TECHNICAL DATA
3
20
125E
1.7/28
1.4/35
1.130/28.7
2,800- -3,200
11,000
8,000
1.1/0.8
Yes
Yes
Walbro/CD
Champion RCJ- -6Y
0.024/0.6
Zama
0.85/0.4
13.3/6.0
94/97
3/5
9/8
Part. no.
531 30 02- -33
545044101