Table of Contents
Advertisement
4-7-5.
MDC-19 Board
Preparation
1.
Refer to
"4-2. Flow
Chart".
Procedure
1.
Loosen the screw to detach the MEM PC board retainer.
2.
Remove the MDC-19 board from the two connectors on the MEC-40 board.
MEM PC board retainer
3.
Install the removed parts by reversing the steps of removal.
PWS-4400
PSW3 x 6
Connectors
MDC-19 board
MEC-40 board
4-30
Advertisement
Table of Contents
