Schiller AT-2plus Manual page 17

Chapter 1
Operating Elements
Settings (cont.)
Interpretation settings:
For AT-2plus Memory only:
Automatic Save
Automatic Erase
Baud
Com-Type
Default Settings
To reset the unit to the basic default settings, proceed as follows:
Page 1.14
N/A:+/- 'normal/abnormal' is written (+) or suppressed (-)
U:+/- 'unconfirmed report' is written (+) or suppressed (-)
A30:+/- patient age is assumed to be < 30 (-) or >30 (+)
S: +/- low (-) or high (+) sensitivity
Enabled (+) or Suppressed (-)
Enabled (+) or Suppressed (-)
Data transmission speed (9600 - 115200 bit/s, see page 1.25)
Communication mode, Line or Modem (see page 1.25)
ALT - 0 - 6 - 6
SETTINGS STANDARD
LANGUAGE AS SET
LEADS STANDARD (S)
AUTO FORMAT 1 ECG: 25MM/S, SHORT (O)
AUTO FORMAT 2 ECG: 25MM/S, LONG (OOO)
RHYTHM LEADS V1
AUTOM.
ENABLED (+)
CENTERING
PRINTOUT OF
SEQUENTIAL
SIGNALS
BASELINE FILTER
0.05HZ
SETTING
MAINS FILTER
50HZ (60HZ)
SETTINGS
MYOGRAM
35HZ, OFF
FILTER SETTING
BAUD RATE 115200 BPS
MEMORY AND
SERIAL
AUTO STORAGE ON (+)
COMMUNICATIO-
AUTO DELETETION OFF (-)
N INTERFACE
OPTION
TRANS. MODE: LINE
AUTO SAVE ENABLED (+)
MEMORY
AUTO ERASE DISABLED (-)
INTERPRETATION
SETTINGS
SCHILLER AT-2plus 6-Channel ECG Unit
SERVICE HANDBOOK Issue d May 2002
WITH INTERPRETATION
AS SET
STANDARD (S)
ECG : 25MM/S, SHORT (O)
MECG: 2*6 (50MM/S + 1)
MEASUREMENTS:
SUPRESSED (-)
INTERPRETATION:
ENABLED (+)
MARKS: ENABLED (+)
ECG : 25MM/S, LONG
(OOO)
MECG: NONE
MEASUREMENTS:
SUPRESSED (-)
INTERPRETATION:
DISABLED (-)
MARKS: ENABLED (+)
V1, II
ENABLED (+)
SEQUENTIAL
0.05HZ
50HZ (60HZ)
35HZ, OFF
BAUD RATE 115200 BPS
AUTO STORAGE ON (+)
AUTO DELETETION OFF (-)
TRANS. MODE: LINE
AUTO SAVE ENABLED (+)
AUTO ERASE DISABLED (-)
N/A: SUPRESSED (-)
U: ENABLED (+)
A30: UNDER THIRTY (-)
S: LOW (-)