Overview - UEi DL589 Instruction Manual

A
C
D
E
F
DL589
G
H
SELECT
AUTO
I
J
K
L
A. Clamp: Measure inductive AC/DC current. Opens to 1.25" (32.0mm).
B. Conductor Alignment Marks: Use to aid the visual alignment of a
conductor when measuring inductive amperage. Greatest accuracy
is achieved when the conductor inside the clamp is centered at the
intersection of these marks.
C. Worklight: Lights clamp area in dark work environments.
D. Category Max Indicator: Maximum CAT Rating for clamp jaw.
E. NCV Alert Light: Indicates voltage when in NCV (Non Contact Voltage)
mode and High Voltage alert.
F. Clamp Lever: Opens and closes current clamp jaw.
NOTE: The clamp uses a high-tension spring to close the jaw. Do not
allow fingers or objects to become pinched in the base as the jaws close.
G. Rotary Selector Dial: Set Rotary Selector Dial desired function
H. SELECT Button:
• Press to select AC or DC on Low Z setting; AC or DC on voltage setting; to
activate Ohms, Continuity, Diode, Capacitance on Ohms/Continuity/
Diode/Capacitance setting; AC or DC on Low Amps setting; T1, T2, T1-T2
on temperature setting
I. Range/°C°F Button:
• Press to set manual range desired
• Press and Hold to select °F or °C temperature setting.
J. Min/Max/Avg/Peak Button:
• Press to enter MIN/MAX mode.
• Step through maximum(MAX), minimum(MIN), average(AVG)
and present values.
• Press and hold return to Live readings
• Press and hold to select PEAK hold at AC or DC voltage.
K. Category Max Indicator: Maximum CAT Rating for input jacks.
B
CAT IV
600V 600A
A
Temp
µA
V
Low Z
A
V
PEAK
True RMS
30V
T
T
2
1
TEMP

Overview

M
N
O
P
Q
R
S
T
7
U
V
W
X
S/N