Safety Precaution Sheet - Struers Accutom-100 Instruction Manual

4
Accutom-100
Instruction Manual

Safety Precaution Sheet

Read carefully before use
Ignoring this information and mishandling of the equipment can
1.
lead to severe bodily injuries and material damage.
The machine must be installed in compliance with local safety
2.
regulations. All functions on the machine and any connected
equipment must be in working order.
The operator(s) must read the Safety and User's Guide
3.
sections of this manual and the relevant sections of
the manuals for any connected equipment and accessories.
The operator(s) must read the Instructions for Use and, where
applicable, Safety Data Sheets for the applied consumables.
This machine is to be operated and maintained by
4.
skilled/trained personnel only.
5. Use only intact cut-off wheels. Cut-off wheels must be
approved for min. 5,000 rpm.
The machine must be placed on a safe and stable table with
6.
an adequate working height able to carry the machine and
supplementary accessories and consumables.
Operators should ensure that the actual voltage corresponds to
7.
the voltage on the rear of the machine. The machine must be
earthed. Follow the local regulations. Always turn the power off
and remove the plug or the cable before dismantling
the machine or installing additional components.
Consumables: only use consumables specifically developed for
8.
use with this type of materialographic machine.
Observe the current safety regulations for handling, mixing,
9.
filling, emptying and disposal of the additive for cooling fluid.
Avoid skin contact with the additive for cooling fluid.
Mind the protruding safety catch when the guard is raised.
10.
The workpiece must be securely fixed in a clamping device.
11.
Use of working gloves is recommended as the specimen may
12.
be both very hot and have sharp edges.
1 From Safety Precaution Sheet, Revision B
1