Connecting A Ds3578-Er/Ls3578-Er Scanner Cradle To A Serial Port - Motorola VC70N0 Product Reference Manual

Scan the send row decode data barcode.
7.
Send Row Decode Data Barcode
Figure 2-47
Scan Write to Custom Defaults barcode.
8.
Custom Default Bar Code
Figure 2-48
Verify that the scanner is connected properly. See
9.

Connecting a DS3578-ER/LS3578-ER Scanner Cradle to a Serial Port

To connect a DS3578-ER/LS3578-ER Scanner Cradle to the VC70:
Connect the serial scanner cable to the cradle (use cable P/N CBA-R36-C09ZAR).
1.
Connect the serial scanner cable to the COM1 port.
2.
Connecting Serial Scanner Cradle to COM1 Connector
Figure 2-49
Scan the
3. Set All Defaults
COM1 Port
barcode.
Verifying the Scanner is Working Properly on page
Cable PN: CBA-R36-C09ZAR
Installation 2 - 31
2-42.