Connecting External Devices; Connecting An External Monitor - Fujitsu CELSIUS H5511 Operating Manual

Connecting external devices

Always refer to the safety information provided in
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).

Connecting an external monitor

The HDMI port on your notebook or the optional port replicator can also be used to connect
an external amplifier, LCD TV or a plasma TV with an HDMI connection.
Screen output is limited to a maximum of three screens at the same time (see
keys and key combinations", Page
Monitor Displayport VGADisplay Port HDMIport Monitorport Screenport Screenport Screenport
Digital HDMI connection (on the notebook or on
the optional port replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
Fujitsu
24, section "Toggling the screen output").
Digital display port (on the optional port
replicator)
"Function keys and key combinations", Page
Connecting external devices
"Important notes", Page 12
"Function
24.
before
51