Pioneer 12.301038-01 Installation Manual page 2

1
Use a plastic wig to loosen the panel at
the location of the arrows.
3
Loosen the screws at the location of the
arrows. Remove the original radio.
5
Place the headunit and connect al the
wiring. Gently replace all the panels in
reverse order.
Connect all of the needed wiring harnesses and check all the connections carefully.
2-DIN 12.301038-01
2-DIN
2
Remove the two screws at the location of
the arrows. Now you can gently remove
the panel.
4
Place the 2 – Din metal bracket.
12.CAW1038-01