Coal Layout Instructions - Legendfires Vantage Manual Turbo Installation And User Instructions Manual

COAL LAYOUT INSTRUCTIONS

Fig. 18
Fig. 19
Fig. 20
Front Coal
Fig. 21
Left Hand
Side Cheek
Fig. 22
16
It is very important that all the coals are used and
arranged as shown in order to achieve the desired
Burner Tray
flame picture.
It may be necessary to remove some or all of the coals
to clean them at some time. Cleaning must only be
done using a soft brush.
CAUTION: The coals are extremely fragile and must
be handled accordingly. Gloves should be worn and
Burner Strip
any inhalation of dust should be avoided. The coals
must be kept away from children at all times. Never
put additional coals on the fire. Never use coals
Rear Coal other than those originally supplied, or genuine
Legend Spare Parts.
1. Place the rear coal on the rear coal retainer ledge in
a central position (Fig. 19).
Fuel Bed
2. Place the main fuel bed on to the middle section of
the metal burner tray. It is important that the front edge
of the fuel bed is located behind the burner strip
(Fig. 20).
3. Position the front coal on the front coal retainer,
making sure that the back edge is pushed up against
the front of the burner strip (Fig. 21).
Right Hand
Side Cheek
4. Place the side cheeks into position, making sure
they are positioned either side of the fuel bed and the
overhang is at the front. The outside edge should be in
contact with the radiant box ceramic liner. Ensure that
the lower part of the side cheeks sit on the front coal
and are in front of the rear coal (Fig. 22).