Inspection; Daily Inspection - Toshiba nv Series Instruction Manual

Chapter 6 Maintenance and inspection
6.1

Inspection

6.1.1 Daily inspection

For daily inspection, check the following.
Front panel
<LED>
Check if each of the LEDs is visible. If not, clean it with a soft cloth. Be careful
not to change the switch settings. Check the LED state from the front side.
<Ethernet connector>
Check the following:
If any abnormality is found, contact one of Toshiba's service representatives.
Ventilation hole
Check the front panel and upper ventilation hole of the product for dust or stain.
If the ventilation hole is blocked by dust or stain, remove the dust with a vacuum
cleaner, and then wipe it with a soft cloth.
46
6F8C1358
For safety, avoid touching the interior of the product.
WARNING
It may cause an electric shock.
When touching the product for cleaning, remove the
static electricity from your body.
CAUTION
The static electricity accumulated in the human body may
cause failure of the product.
When cleaning the product, do not change the switch
CAUTION setting.
Do not exert any stress on the cables.
Exerting stress on the cables by touching them may cause
malfunction or accidents.
Stop using immediately when an error occurs.
CAUTION
When an error occurs such as unable to turn on the power,
stop using and contact one of Toshiba's service
representatives.
• Cable connection is normal.
• The modular connector is locked.
• Cable connection is not loose or has an abnormal appearance.
Mandatory
Mandatory
Prohibited
Mandatory