Advertisement
Manual
Technical parameter:
Working voltage: DA12V (12V/24V optional)
Static working current: ≤10mA
Working temperature: -40℃—+80℃
Receiving sensitivity: ≥-95dB
Working frequency: commonly used 315MHZ, 433.92MHZ (others can be customized)
Output current: ≤10A
Working mode: inching, self-locking, interlocking (adjustable)
Output mode: contact output (can control AC and DC)
Scope of application:
This product is controlled by an intelligent microprocessor, which can be applied to garage door
control, lighting control, remote control curtains, access control systems and various motor
control systems. Small size, easy to install, safe and reliable in use.
Advertisement
Table of Contents
Summary of Contents for SONGLE SRD-12VDC-SL-C
- Page 1 Manual Technical parameter: Working voltage: DA12V (12V/24V optional) Static working current: ≤10mA Working temperature: -40℃—+80℃ Receiving sensitivity: ≥-95dB Working frequency: commonly used 315MHZ, 433.92MHZ (others can be customized) Output current: ≤10A Working mode: inching, self-locking, interlocking (adjustable) Output mode: contact output (can control AC and DC) Scope of application: This product is controlled by an intelligent microprocessor, which can be applied to garage door control, lighting control, remote control curtains, access control systems and various motor...
- Page 2 Wiring diagram 1: 1. +V: Input the positive pole of the 12V power supply; 2. -V: Input the negative pole of the 12V power supply; 3. NO: output terminal: the normally open terminal of the relay; 4. COM: output terminal: relay common terminal; 5.
- Page 3 Clear data: Wiring the controller, power on, and then clear the code. After pressing the learning button on the control panel 8 times in succession, all the remote controllers that have learned the code will be automatically cleared. After clearing, the remote control that has previously learned to code will no longer be controlled.
- Page 4 indicator lights up, press the remote control button that needs to be paired. The control panel LED indicator flashes 3 times in succession. 2. Self-locking learning method: Press the control panel pairing button twice, the LED indicator flashes 2 times. After the LED indicator lights up, press the remote control button that needs to be paired, and the control panel LED indicator flashes 3 times in succession.
Need help?
Do you have a question about the SRD-12VDC-SL-C and is the answer not in the manual?
Questions and answers