Forza 720 LED Spot Light Product Diagram Technical Data Rated power: 800W Input voltage/current: DC48V/16.67A Max AC100-240V 50/60Hz Color Temperature: 5600K CRI: 95 TLCI: 96...
Page 4
8. Control unit 10. AC power input socket output socket 11. Power switch 9. DMX OUT 12.DMX IN 13. USB port 14. Control panel 16. Control unit handle 17. Quick release plate 15. Battery holder 15. Battery holder...
Detailed Description 1. Fixture body handle: Be convenient for users to lift the lamp head and adjust the diection of the light. 2. Fixture body input socket: For connecting the lamp head with control unit. 3. Umbrella hole: For installing/removing an umbrella. 4.
Page 6
Usage 1. Connection between the Light Fixture, Control Unit and the Power Outlet.
Page 7
Note: ① When connecting the power supply, please make sure the power, voltage and frequency are consistent with the control unit. ② Make sure to use the provided power cable and DC connecting cable. The connection between the DC plug and the fixture body input socket should be connected as following 6GND 6GND...
Page 8
2. Connection between the Light Fixture and Control Unit with Battery Battery Note: ① When powered by two 14.8V batteries, the maximum output is 40%. ② When powered by two 26V batteries, the maximum output is 70%. ③ Do not use the 14.8V and 26V batteries at the same time, or use only one battery of either kind to power the fixture.
Page 9
3. Quick Release Clamp Installation ① ② Loosen the kipp handle to open the clamp. Mount the quick release clamp on the light stand, then rotate the kipp handle to tighten the clamp. ③ ④ Align the quick release plate on the control unit When removing the control unit, press the lock with the quick release mount on the clamp to catch on the clamp and release the control unit...
Page 10
4. Reflector Installation ① ② Align the reflector with the mount and rotate Press the lock catch and rotate the reflector according to the sign to secure it into the according to the sign to release it from the fixture. fixture.
Remote Control Forza 720 supports DMX, 2.4G, RDM remote control, and includes a built-in Bluetooth as well. · ▲Address code need to be pre-set for DMX, 2.4G, RDM remote control solutions. 1. ADDRESS/DMX, including ADDRESS, DMX MODE and DMX DIMMING CURVE settings.
Page 12
MENU MENU CH: 512 CH: 512 ADDRESS/DMX ADDRESS RESET BLUETOOTH DMX MODE WIRELESS PROTOCOL DMX DIMMING CURVE FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS PRESS “MENU” TO RETURN Rotate ''Right knob'' to ADDRESS/DMX. Press ''Right knob'' to enter the corresponding sencondary menu. MENU MENU CH: 512...
② DMX MODE MENU MENU CH: 512 CH: 512 ADDRESS DAYLIGHT 8bit DMX MODE DAYLIGHT 16bit DMX DIMMING CURVE ULTIMATE DMX 8bit PRESS “MENU” TO RETURN PRESS “MENU” TO RETURN Rotate ''Right knob'' to DMX MODE. Press ''Right knob'' to enter the corresponding third menu. MENU MENU CH: 512...
Page 14
③ DMX DIMMING CURVE MENU MENU CH: 512 CH: 512 ADDRESS LINEAR DMX MODE EXPONET DMX DIMMING CURVE LOGARITHM S CURVE PRESS “MENU” TO RETURN PRESS “MENU” TO RETURN Rotate ''Right knob'' to DMX DIMMING CURVE. Press ''Right knob'' to enter the corresponding third menu. MENU MENU CH: 512...
Page 15
2. DMX Remote Control ① Connect the fixture to the DMX/RDM consoles via DMX cable as shown below: DMX IN DMX OUT 1 GND GND 1 2 DATA- DATA- 2 3 DATA+ DATA+ 3 The connection between light fixtures, or light fixture and DMX/RDM console, must use 5-Pin shielded cable. ·...
Page 16
Refer to the DMX reference guide and control the light via DMX/RDM console. (For detailed operation please refer to the DMX/RDM console operation manual.) Note: DMX reference guide "Forza 720 DMX REFERENCE GUIDE(NANLITE) V1 20211215 W" is downloadable from www.nanlite.com.
Page 17
3. 2.4G Remote Control Set the address of the 2.4G remote controller to be consistent with the light fixture, enabling the fixture to be · remotely controlled by 2.4G remote controller or by APP via the transmitter box. ① Note: 2.4G remote controller and transmitter box are sold separately.
Page 18
Operating Instructions 1. Be sure that the power switch of the control unit is in the "off " position. Now it is safe to connect the control unit and power the unit on, the screen will display "NANLITE". Powered by...
Page 19
① DAYLIGHT button: Press the DAYLIGHT button to enter the DAYLIGHT MODE, rotate the "Left knob", clockwise to increase brightness while counterclockwise to reduce the brightness. The screen shows the percentage of brightness, DIM range: 0.0-100.0%. DAYLIGHT DAYLIGHT CH: 512 CH: 512 100.0% 0.0%...
Page 20
PRESS “MENU” TO RETURN DAYLIGHT EFFECT MENU LOCK Forza 720 has built-in effects including: INT LOOP, FLASH, PULSE, STORM AUTO, STORM MANUAL, TV, · PAPARAZZl, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION AUTO, EXPLOSION MANUAL and WELDING. EFFECT MODE EFFECT MODE CH: 512...
Page 21
EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: INT LOOP EFFECT: INT LOOP DIM: 0.0% - 100.0% DIM: 0.0%-100.0% DECAY: 8s DECAY: 8s Rotate the "Right knob" to select options under the effects. EFFECT MODE EFFECT MODE CH: 512 CH: 512 EFFECT: INT LOOP EFFECT: INT LOOP...
Page 22
3. MENU button: Press the MENU button to enter the menu. MENU CH: 512 ADDRESS/DMX RESET BLUETOOTH WIRELESS PROTOCOL FAN CONTROL ROTATE SCREEN Left knob Right knob SCREEN BRIGHTNESS DAYLIGHT EFFECT MENU LOCK Rotate "Right knob" to select the setting item and press "Right knob" to enter the corresponding secondary menu. ·...
① ADDRESS/DMX For more operation details please refer to P14. ② RESET BLUETOOTH MENU MENU CH: 512 CH: 512 ADDRESS/DMX RESET BLUETOOTH RESET BLUETOOTH WIRELESS PROTOCOL BACK RESET FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS PRESS “MENU” TO RETURN Rotate ''Right knob'' to RESET BLUETOOTH. Press ''Right knob'' to enter the corresponding third menu. MENU MENU CH: 512...
④ FAN CONTROL MENU MENU CH: 512 CH: 512 ADDRESS/DMX RESET BLUETOOTH WIRELESS PROTOCOL FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS FULL PRESS “MENU” TO RETURN Rotate "Right knob" to FAN CONTROL. Press "Right knob" to enter the corresponding secondary menu. MENU MENU CH: 512...
⑤ ROTATE SCREEN MENU MENU CH: 512 CH: 512 ADDRESS/DMX RESET BLUETOOTH DO YOU WANT ROTATE WIRELESS PROTOCOL SCREEN FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS Rotate "Right knob" to ROTATE SCREEN. Press "Right knob" to enter the corresponding secondary menu. MENU CH: 512 DO YOU WANT ROTATE...
⑥ SCREEN BRIGHTNESS MENU MENU CH: 512 CH: 512 ADDRESS/DMX RESET BLUETOOTH SCREEN BRIGHTNESS WIRELESS PROTOCOL FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS PRESS “MENU” TO RETURN Rotate ''Right knob'' to SCREEN BRIGHTNESS. Press ''Right knob'' to enter the corresponding secondary menu. MENU MENU CH: 512...
⑦ BUTTON BACKLIGHT MENU MENU CH: 512 CH: 512 RESET BLUETOOTH WIRELESS PROTOCOL FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT PRESS “MENU” TO RETURN Rotate ''Right knob'' to BUTTON BACKLIGHT. Press ''Right knob'' to enter the corresponding secondary menu. MENU MENU CH: 512...
Page 28
⑧ LANGUAGE MENU MENU CH: 512 CH: 512 WIRELESS PROTOCOL ENGLISH FAN CONTROL 简体中文 ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE FULL PRESS “MENU” TO RETURN Rotate ''Right knob'' to LANGUAGE. Press ''Right knob'' to enter the corresponding secondary menu. MENU MENU CH: 512...
⑨ FIRMWARE UPDATE Store the firmware files of the lamp head and the controller in the root directory of the USB flash drive at the same · time (make sure the versions of the two firmware files are matched), and then Insert the USB flash drive into the USB port of of the controller.
Page 30
To upgrade, please switch off the SCREEN BRIGHTNESS light, plug in USB drive that has BUTTON BACKLIGHT new firmware, and restart the light. LANGUAGE www.nanlite.com VERSION PRESS “MENU” TO RETURN Rotate "Right knob" to VERSION. Press "Right knob" to check the current version.
Page 31
4. LOCK button: Press and hold the "LOCK button" to lock all functions. Operation buttons or adjustment knobs can not change the current function. Press and hold the LOCK button again to release the Lock status. DAYLIGHT DAYLIGHT CH: 512 CH: 512 100.0% 100.0%...
Safety Precautions 1. Please open the package to check for possible damage caused in transit, please do not use if damage is found and contact place of purchase or manufacturer as soon as possible. 2. Do not use a power cord with damaged insulation, do not unplug too hard or drag the power cord directly. 3.
Page 33
General Fault Detection and Diagnosis Diagnosis Fault Detection 1. Please check that the power supply, cable and outlet are properly The light won't boot up properly connected and that the cable is not faulty or loose. 2. Please check wether the voltage value is within the specified parameters. 1.
Page 34
Guangdong NanGuang Photo&Video Systems Co., Ltd Guangdong NanGuang Photo&Video Systems Co., Ltd This manual and all stats within it were produced under controlled conditions, and are accurate at time of print. Any future changes to design/technical data can be found at www.nanlite.com.
Need help?
Do you have a question about the Forza 720 and is the answer not in the manual?
Questions and answers