What Is The Difference Between Global Output Routing And Output Routing In Presets; How Do I Route Whatever Is Being Monitored To The Xlr And Aes Outputs; How Do I Have A Downmixed Pre-Fade Output On Aes Pair-1 Combined With A Post-Fade Output On The Analog Xlrs - Wohler iAM2-8 User Manual

2ru multi-channel audio monitor
Table of Contents

Advertisement

3. AES Pairs 1 through 4: The first 8 channels appear on these outputs in
numeric order. They are pre-fade, so they are unaffected by the Volume and
Balance knobs or headphone insertion. They are also unaffected by the
solo/mute selections on the Audio Meter screen.
4. AoIP Pairs 9 and 10: These outputs follow the same configuration as the
internal speakers. They are controlled by the Volume and Balance knobs
and are muted whenever a headphone is inserted into the Headphone jack.
These outputs also follow the solo/mute selections on the Audio Meter
screen.
What is the difference between Global Output Routing and Output
Routing in Presets?
Both are used to configure the unit outputs. Global Output Routing is applied by
default when you select a source or when creating presets and when you don't
change the Output Routing unique to any Preset. Changes to either of these are
disabled if the OPT-OUTPUT-ROUTING license is not purchased.
How do I route whatever is being monitored to the XLR and AES
outputs?
Using Global Output Routing (optional licensing upgrade), you may route any
signals to the XLR & AES outputs. You may route signals to the XLR outputs using
the Analog/XLR checkboxes and route signals to the AES outputs by using the
AES/Pair 1 to Pair 4 checkboxes.
As shown in the above example, signals appearing on Audio Meter channels 1
through 4 are routed to AES Pair 1 and signals from Audio Meter channels 3 to 8
are routed to the Analog XLR outputs.
How do I have a downmixed pre-fade output on AES Pair-1
combined with a post-fade output on the Analog XLRs?
To downmix a pre-fade output on AES Pair-1, uncheck the Volume Control
checkbox for that AES pair. For a Post-fade output on the Analog XLRs, check
Volume Control checkbox.
Page 64

Advertisement

Table of Contents
loading

Table of Contents