Hawksmoor 66933 User Instructions

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Original User's Instructions

52cc Brush cutter

SKU: 66933

READ BEFORE USE

PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE

Table of Contents

Need help?

Do you have a question about the 66933 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hawksmoor 66933

Page 1 Original User’s Instructions 52cc Brush cutter SKU: 66933 READ BEFORE USE PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE...
Page 2: Table Of Contents
CONTENT ∫ WHAT’S IN THE BOX ---------------------------------------------------------- 3 ∫ SPECIFICATIONS -------------------------------------------------------------- 4 ∫ EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS ---------- 5 ∫ IMPORTANT SAFETY WARNINGS -------------------------------------------- 7 ∫ PRODUCT DESCRIPTION AND IDENTIFICATIONS ------------------------ 13 ∫ ASSEMBLY AND OPERATING INSTRUCTIONS -----------------------------14 ∫...
Page 3: What's In The Box
WHAT'S IN THE BOX Main unit Shaft Hex key 5mm Hex key 4mm Socket wrench/ Screw driver Wrench slotted screwdriver Guard Spool Blade Double shoulder harness Fuel mixing bottle If you do not have all these items, please contact: www.coreservice.co.uk Hotline: +44 01904 947568 Email support@coreservice.co.uk...
Page 4: Specifications
SPECIFICATION • 48cm cutting diameter (spool) • 25.5cm cutting diameter (blade) • 9000 RPM maximum engine speed (blade) • 8000 RPM maximum engine speed (spool) • Aluminium shaft • 2x2m line length Technical Data Property Value Engine type Single-cylinder, 2-stroke Displacement (cc) 52cc Engine power...
Page 5: Explanations And Symbols, Cautions And Warnings
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS Read the instructions and following warnings and safety instructions. Wear eye and hearing protection (PPE). Where this is a risk of falling objects, wear head protection. Wear protective gloves. Wear slip-resistant footwear. When working, the distance between the machine and bystanders shall be at least 15m.
Page 6 Beware of blade thrust! Maximum permitted rotational speed of the cutting blade. Max. 6800 min ‘I’ means ON ‘O’ means OFF Choke. Move choke lever to ‘RUN’ position. See Starting and Stopping Engine Section. Choke. Move choke lever to ‘CHOKE’ position. See Starting and Stopping Engine Section.
Page 7: Important Safety Warnings
IMPORTANT SAFETY WARNINGS General safety WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. • Always ensure anyone intending to operate this machine is fully conversant with the contents of this instruction manual prior to assembling, maintaining or operating the machine.
Page 8 • Never trim while people, especially children or pets, are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. • This cutter is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the cutter by a...
Page 9 • Keep firm footing. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces. • Keep your body away from any moving parts. • To avoid hot surfaces, never operate the unit with the bottom of the engine above waist level.
Page 10 c. Take frequent work breaks. Limit the amount of exposure per day. d. Keep the cutter well maintained, fasteners tightened and worn parts replaced. • If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor. •...
Page 11 Using brush cutter attachment safely WARNING! Danger of injury! The machine must not be used to cut hedges, hard branches and wood, or to crush material for compost. Do not use it to cut grass that is not on the ground, e.g. grass growing on walls, rocks, etc. WARNING! Danger of injury! Rotating blades may lead to serious injuries by cutting or amputating parts of the body.
Page 12 Maintenance WARNING! Switch off the engine before carrying out any work. Wait until all rotating parts have stopped and the cutter has cooled down. 1. Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and spare parts.
Page 13: Product Description And Identifications
PRODUCT DESCRIPTION AND IDENTIFICATIONS 1. Bump feed line spool 10. Choke lever 2. Safety guard 11. Recoil starter handle 3. Lower shaft 12. Spark plug boot 4. Cutting blade 13. Air filter housing cover 5. Bike handle 14. Petrol tank 6.
Page 14: Assembly And Operating Instructions
ASSEMBLY AND OPERATING INSTRUCTIONS WARNING! Take care when removing the packaging to prevent damage to the machine. Make sure that you have sufficient space to put the machine down. Keep your feet apart so that you have a stable position; bend at the knees and keep your back straight. Always recycle the packaging in accordance with local recycling schemes.
Page 15 2. Remove the sleeve on the lower shaft 3. Join the upper and lower shafts Pull the stop pin and slightly rotate it to stop on the depth limit step. Insert the lower shaft into the clamp. Pull the stop pin and slightly rotate it to be off the depth limit step.
Page 16 Assemble the safety guard Remove the two screws from the top of the guard with the hex key. Hold the Guard underneath the bracket, insert the two screws through the bracket in to the holes in the guard and re-tighten firmly. See picture below. WARNING! Use only original manufacturer’s replacement parts, accessories and attachments.
Page 17 A. Assemble the line spool Line up the two holes of the flange and shield(black one). Lock the spindle by inserting the 5mm hex key through the holes. Mount the inner flange(a) and line pool into the spindle and rotate counter-clockwise until the line spool is fitted securely.
Page 18 Fit the strap The brush cutter must always be used with the double shoulder harness provided. 1. Put the left and right straps over the shoulders and secure with the quick-connect function of the harness. The finished set-up should resemble the picture below. Note: At the front of the harness there is an easily accessible quick-release function.
Page 19 2. Hook the double belt harness into the strap support ring on the shaft tube. 3. Adjust the length of the harness so that the hook is approximately 15 cm below your waist. In case of emergency, pull the rope of the quick release mechanism. The metal locking bar will be released automatically because of the weight of the machine, and the machine will drop away from you.
Page 20 PREPARATION Fuel and oil mixture WARNING! Always switch the engine off before fuelling. Never add fuel to a machine with a running or hot engine. Move at least 30ft. (9m) from the refuelling site before starting the engine. Do not smoke! IMPORTANT! Keep the bottle level and stable while filling and use a suitable funnel (not supplied).
Page 21 OPERATION When working with the machine, the appropriate safety guard must be fitted to prevent objects being thrown out. The integrated blade fixed on the safety guard automatically cuts the line to the optimum length. ATTENTION! Before operating, you must fill the machine with fuel. Starting the unit Do not start the brush cutter until it has been completely assembled.
Page 22 3. Put the choke lever (10) in position. 4. Press the primer bulb 5 times. Note: If the engine is warm, move the choke lever (10) to the position, do not press the primer bulb. 5. Press and hold the machine then pull the recoil starter handle 5-6 times to start the engine. 6.
Page 23 7. Run the machine for 30 seconds at idle speed, press the throttle lock (7), then hold throttle lever (8) to increase the speed. When the throttle lever(8) is depressed approximately 50% the throttle lock (16) can be pressed if required. This will hold the throttle at this point. To disengage the cold start switch squeeze the throttle lever fully and release.
Page 24 10. If any problem occurs, pull the rope of the quick release mechanism. The metal locking bar will be released automatically because of the weight of the machine, and the machine will drop away from you. 11. If the engine is hot, on/off swtich level can be adjusted to the ‘I’ position when restarting the brush cutter.
Page 25 IMPORTANT: Remove all grass and weed remnants at regular intervals to prevent the shaft tube overheating. Lawn, grass and weed remnants become trapped under the safety guard, preventing the shaft tube from receiving adequate ventilation. Remove the remnants carefully using a suitable tool.
Page 26 Cutting along fences/foundations Approach wire mesh fences, lath fences, natural stone walls and foundations slowly so that you can cut close to them without striking the obstacle with the line. If, for example, the line strikes stones, stone walls or foundations, it will wear or fray. If the line strikes wire fencing, it will break. Trimming around trees When trimming around tree trunks, approach slowly so that the line does not strike the bark.
Page 27: Care And Cleaning
CARE AND CLEANING INJURY WARNING: Always wear protective gloves when working on or around cutting equipment. BEFORE EACH USE • Remove dirt and debris from the tool exterior. • Check all screws for tightness and tighten if necessary. • Check blade flange nut is tight and tighten if necessary. •...
Page 28 • AIR FILTER - Replace. • Use the spark plug wrench to remove the spark plug (turn anticlockwise to remove). • Spark plug – Replace STORAGE (30 DAYS OR LONGER) • CLEANING - Thoroughly clean the tool exterior. • INSPECTION - Inspect the entire tool for damage, including loose or missing components and repair as necessary.
Page 29 Replacing the line spool/cutting line 1. Dismantle the line spool as described in the ‘Assembly’ section. Press the spool together and remove one half of the housing. 2. Take the spool plate out of the line spool housing. 3. Remove any remaining cutting line. 4.
Page 30 5. Under tension, wind the line onto the spool counter clockwise. The spool splitter will separate the two halves of the line. 6. Hook the last 15cm of the two ends of the line onto the opposite lying line holders of the spool plate.
Page 31 Change and clean the spark plug 1. Once the engine has cooled, remove the spark plug using the socket spanner supplied. 2. Clean the plug with a wire brush. 3. Using a feeler gauge, set the gap to 0.5-0.7mm. 0.5-0.7mm 4.
Page 32 5. After the spark plug is seated, tighten with a spanner to compress the washer. Change and clean the air filter Soiled air filters reduce the engine power by supplying too little air to the carburettor. Regular checks are therefore essential. 1.
Page 33 Transport Due to safety reasons, please see to it that the cutter is transported free of oil and petrol! Worn parts Even when used in the intended way, some components are subject to normal wear. They will have to be replaced depending on the duration of usage. These parts include, among others, the cutting tool and the retaining disk.
Page 34: Trouble Shooting
TROUBLE SHOOTING The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your cutter fails to work properly. If the problem persists after working through the list, please contact your nearest service workshop. PROBLEMS POSSIBLE CAUSES REMIDIES...
Page 35: Declaration Of Conformity / Performance
DECLARATION OF CONFORMITY / PERFORMANCE Product Code: 66933 (BC520) Product Description Hawksmoor: 52cc Brush cutter 1.Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation 2.Object of the declaration...
Page 36: Environmental Information
ENVIRONMENTAL INFORMATION Old products are potentially recyclable and do not, therefore, belong in your household rubbish. You are requested to assist us and our contribution to saving resources and protecting the environment by handing in this product at an equipped collection centre (if there is one available).
Page 37: Guarantee
GUARANTEE Toolstation products deliver reliable service for normal, household use in domestic settings. All Toolstation products are individually tested before leaving the factory. If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...