Endress+Hauser Deltabar FMD72 Operating Instructions Manual page 100

Description of device parameters
Description
Factory setting
COUNTER P < Pmin (262)
Navigation
Write permission
Description
COUNTER P > Pmax (263)
Navigation
Write permission
Description
MIN. MEAS. TEMP. (264)
Navigation
Write permission
Description
MAX. MEAS. TEMP. (265)
Navigation
Write permission
Description
100
Enter the device tag, e.g. TAG number (max. 8 alphanumeric characters).
No entry or according to order specifications
Diagnosis ® Sensor HP ® Counter P < Pmin (262)
No write permissions. Parameter is read only.
Displays the negative pressure counter for the respective sensor module. The counter is incremented
each time error 841 occurs. You can reset this value using the "Reset Peakhold (161)" parameter.
Diagnosis ® Sensor HP ® Counter P > Pmax (263)
No write permissions. Parameter is read only.
Displays the overpressure counter for the respective sensor module. The limit value is: upper sensor
module nominal value + 10% of upper sensor module nominal value. You can reset this value using
the "Reset Peakhold (161)" parameter.
Diagnosis ® Sensor HP ® Min. Meas. Temp. (264)
No write permissions. Parameter is read only.
Displays the smallest temperature measured in the sensor module. You can reset this value using
the "Reset Peakhold (161)" parameter.
Diagnosis ® Sensor HP ® Max. Meas.Temp. (265)
No write permissions. Parameter is read only.
Displays the largest temperature measured in the sensor module. You can reset this value using the
"Reset Peakhold (161)" parameter.
Deltabar FMD72