Frequently Asked Questions - GPX TD1510 User Manual

How do I get my CD or DVD out of the
television?
To eject a disc from the television, press the Source
Button and adjust the television to DVD Mode,
then press the Eject Button on the right side of the
television or on the remote.
How do I reset my television?
Press the Menu Button on the top of the television
or on the remote to access the television's menu.
Press the TV Navigation Buttons (▲/►/▼/◄/
Enter) to select the Setup page, then scroll down to
Restore Default and press the Enter Button.
Problem
TV will not switch on.
Screen appears very slowly after the power is
turned on.
Screen is too bright or too dark.
Picture appears too large or too small on the
screen.
Stripes appear on the screen and it shakes.
The screen does not move.
Screen appears, but there is no sound.
Remote control does not work.
CUSTOMER HELPLINE | 1-314-621-2881
Where do I get HDTV antenna information?
The internet is an excellent starting point to get
information on HDTV antenna's. Just type "HDTV
Antenna" into a search engine (Google, Yahoo,
etc.).
You can also ask a representative at your local
electronics store (Best Buy, RadioShack, etc.).
Why can't I pick up channels on my NTSC
tuner?
NTSC is an analogue standard which is currently
being phased out as the presence of digital sources
becomes more prevalent. Unfortunately, if you are
experiencing this issue, you must purchase a digital
converter box or upgrade your tuner.
Action
Is the power connected? Insert the power plug.
Press the power button on the remote control.
This can occur during normal operation as part of the screen illumination
process. If nothing happens after 30 seconds contact GPX.
Adjust the brightness or contrast in the televisions setup menu.
Adjust screen size by pressing the Wide Button on the remote control.
Turn off nearby electrical goods.
Press the button. Check if the Pause button is pressed on
external equipment.
1. Press the MUTE button.
2. If the audio is coming from an external source, check that the cable
is corrected to this device properly.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
1. Check if the mains power is on.
2. Check that the batteries in the remote control were inserted properly.
3. Check to see if any obstacles exist between the LCD TV and the remote
control, remove, if any.
4. If the batteries have no power, replace them with two new batteries.

FREQUENTLY ASKED QUESTIONS

GPX | TD1510 11