Bredband2 Tilgin HG2501 Installation Manual page 10

Connecting the LAN
1. Connect a network cable
between the yellow network port
(LAN 1-4) and the network port on
the back or side of your computer
or the device you want to connect.
If you have more devices, use LAN2,
LAN3 and LAN4.
2. Finally, plug the power adapter into
an electrical outlet and the contact
into the router where it is labeled
"POWER" and press the power button
on the back of the router to turn on
the device.
3. Start the computer or the device you
have connected.
4. The Status-, Internet-, WAN- and
WiFi-lights will shine a constant
green on your router when the
installation is complete.
Connecting the WiFi
1. Make sure that the WiFi light (see
picture labeled "Front ", WiFi) on your
router is lit green. If it isn't lit: press
the WiFi-button on the back of the
router to active WiFi.
2. Make a search for wireless networks
on your computer or the device you
want to connect.
3. Compare the list of network names
(SSIDs) with the name shown on
a sticker on the bottom of the router.
4. Connect by double clicking on the
correct SSID and then enter the
password. This can be found on
the sticker labeled "WPA key" on the
bottom of the router. The password
10
Multi WAN Residential Gateway
must be typed exactly as written, i.e.
uppercase and lowercase letters.
Description of the front panel
Graphics on the front panel:
1. Status
Green light: The power is on,
normal function.
Green flashing light: Updating or
connecting, do not turn off the power.
Red light: Starting. If the red light
persists: contact Bredband2.
Red flashing light: Can't connect
to internet.
Off: The router has no power.
2. Internet
Green light: Connected to
the network.
Off: Connection to the
network failed.
3. WAN
Green light: Connected to internet.
Green flashing light: Data traffic is
being sent/received.
Off: Not connected to the internet.
4. LAN
Green light: Connected to other
devices with a network cable.
Green flashing light: Connected
with a network cable and
generating traffic.
Off: Not connected with a
network cable.
5. WiFi
Green light: WiFi is active.
Green flashing light (slow): Searching
for other devices using WPS
Green flashing light (short): WPS
connection is working.