Related Manuals for AUTOLIFT I-Swim2
Summary of Contents for AUTOLIFT I-Swim2
- Page 1 SWIMMING POOL LIFT TO TRANSFER DISABLED PERSONS DEVICE I-Swim2 MODEL ORIGINAL INSTRUCTIONS REVISION 05 / 2020 YEAR...
-
Page 2: Table Of Contents
Swimming Pool Lift DEVICE INDEX i-swim2 MODEL GENERAL WARNINGS ........................3 MANUFACTURER IDENTIFICATION ....................3 MARKING ............................3 DECLARATION OF CONFORMITY ....................4 IDENTIFICATION OF AUTHORIZED PERSONNEL ................5 STRUCUTURE AND USE OF THE MANUAL ..................5 LIST OF ENCLOSURES ........................6 SAFETY –... -
Page 3: General Warnings
Swimming Pool Lift DEVICE GENERAL WARNINGS i-swim2 MODEL MANUFACTURER IDENTIFICATION AUTOLIFT SRL Via Trentin 8 – 46020 Pegognaga (MN) - Italy Tel. +39 0376 550375– info@autoliftsrl.com MARKING The lifting device is manufactured in accordance with the relevant Community Directives and applied at the time of placing on the market the same. -
Page 4: Declaration Of Conformity
Via Trentin 8 – 46020 Pegognaga (MN) - Italy Tel. +39 0376 550375 – info@autoliftsrl.com Declares under its own responsibility that the medical device: NAME ............SWIMMING POOL LIFT TO TRANSFER DISABLED PERSONS MODEL ............i-swim2 SERIES ............…...………………...Class 1 CLASSIFICATION YEAR OF CONSTRUCTION……………... -
Page 5: Identification Of Authorized Personnel
In addition to the duty to follow the instructions given in this manual, the operators have the obligation not to use the lift and report to their managers in charge or, in the absence of these, directly to the manufacturer AUTOLIFT srl, any deficiency or potentially hazardous situation which should occur. -
Page 6: List Of Enclosures
Swimming Pool Lift DEVICE GENERAL WARNINGS i-swim2 MODEL This manual consists of 38 pages, including the cover, and equipped with attachments (see par.1.6). Data and drawings are provided as example, the manufacturer, to pursue a policy of constant development and updating of the product, can make changes without prior notice. -
Page 7: Safety - General Rules
Swimming Pool Lift DEVICE GENERAL WARNINGS i-swim2 MODEL SAFETY – GENERAL RULES OPERATORS SHOULD READ THIS INSTRUCTION BEFORE USING THE LIFT . The staff involved in the operation must be in perfect physical and psychological conditions. Do not approach and do not put hands near moving parts. -
Page 8: General Description
Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL COMPONENTS 1. Seat 2. Armrest 3. Safety belt 4. Footrest 5. Lower Carter 6. Upper Carter 7. Arm lateral stabilizer 8. Remote control Column 10. Arm 11. Lifting actuator 12. Seat support 13. - Page 9 Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL 15. Rotation motor 16. Rotation hub 17. Front wheel 18. Orientable rear wheel 19. Fixed ballast 20. Rotating ballast Page 9 of 40...
-
Page 10: Dimensions
Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL DIMENSIONS Page 10 of 40... - Page 11 Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL Page 11 of 40...
- Page 12 Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL Page 12 of 40...
-
Page 13: Technical Data
Swimming Pool Lift DEVICE GENERAL DESCRIPTION i-swim2 MODEL TECHNICAL DATA Structure Material Aluminium / stainless steel Shell material Ballast material Steel S235jr Ballast mass 227,5 kg Power supply 24 V d.c. 2,9 Ah (optional 3,3 Ah – 6,6 Ah) Battery capacity Autonomy of the battery 30 lifting cycles (55 –... -
Page 14: Field Of Use
Swimming Pool Lift DEVICE FIELD OF USE i-swim2 MODEL PROVIDED USE The lift, placed at poolside, must be used only for the transfer of disabled persons inside the pool and for their exit. The positioning of the machine at the poolside should be without person on board, by an authorized operator. -
Page 15: Safety Devices
Swimming Pool Lift DEVICE SAFETY DEVICES i-swim2 MODEL On the lift there are the following safety devices: Emergency stop Safety belt Brake for orientable wheels Lower Carter Upper Carter Arm lateral stabilizer IT IS FORBIDDEN TO TAKE OFF, REMOVE OR MODIFY THE EXISTING SECURITY DEVICES. -
Page 16: Warnings
Swimming Pool Lift DEVICE WARNINGS i-swim2 MODEL ON THE LIFT THERE ARE THE FOLLOWING WARNINGS IT IS FORBIDDEN THE USE OF THE LIFT TO PERSONS NOT TRAINED AND NOT AUTHORIZED TO LEAVE THE LIFT WITH PERSON ON BOARD TO CARRY AND / OR LIFT THINGS OR ANIMALS TO TRANSIT AND USE THE LIFT IN THE PRESENCE OF STEPS, ROUGHNESS, BRITTLE AND INCLINED FLOORS. -
Page 17: Personal Safety Devices
Swimming Pool Lift PERSONAL SAFETY DEVICE i-swim2 DEVICES MODEL IT IS FORBIDDEN TO MODIFY / REMOVE THE SIGNALS AFFIXED. As necessary or required by the relevant legislation in force, use custom security equipment. The personal safety devices are equipment designed to be worn by the worker to protect him against specific risks than can arise due to the type of working effected. -
Page 18: Residual Risks
This risk is considered as residual risk and is indicated in the sign placed on the lift. This risk must be eliminated by the user. The company AUTOLIFT Srl is able to offer and produce any support plan as per Customer’s need if required by the user. -
Page 19: Installation
Swimming Pool Lift DEVICE INSTALLATION i-swim2 MODEL RECEIPT AND INSPECTION Upon receipt of the lift carry out the following checks: - Check whether the delivery agrees with the order specifications and to the transport document. - Make sure the packaging is undamaged and that no parts are damaged or broken during transport. -
Page 20: Handling
Swimming Pool Lift DEVICE INSTALLATION i-swim2 MODEL HANDLING Handling of the packed lift must be effected through manual forklift, forklift, etc. The vehicles used for safe handling procedures must have a capacity not less than 400 kg. PERSONNEL EMPLOYED FOR HANDLING MUST WEAR: SAFETY SHOES WITH IRON TOE AND ANTI-SLIP SOLE. -
Page 21: Positioning
Swimming Pool Lift DEVICE INSTALLATION i-swim2 MODEL POSITIONING The lift is provided in parts to be assembled according to the following instructions. For the assembly of the parts is necessary the presence of two operators. Personnel employed for opening the package must wear: safety shoes with iron toe and anti-slip sole and suitable gloves. - Page 22 Swimming Pool Lift DEVICE INSTALLATION i-swim2 MODEL After the inspections as described in chapter 8.1, check the state of charge of the batteries by means of the instrument placed on the control panel as described in point 9.2. BEFORE STARTING THE LIFT CHECK THE CHARGE CONDITION OF THE BATTERIES.
-
Page 23: Use
Swimming Pool Lift DEVICE i-swim2 MODEL CONTROL PANEL AND REMOTE CONTROL On the machine are present: A. remote control for lifting / lowering and rotation of the user's location. The remote control is used directly by the person sitting on the machine or by an eventual assisstant. - Page 24 Swimming Pool Lift DEVICE i-swim2 MODEL In normal operation the display shows the remaining battery power. DISPLAY In case of pressing the emergency button (1) on the display the STOP warning appears and the machine stops. The emergency stop button can be pressed only by an assistant and / or a supervision operator.
-
Page 25: Preliminary Operations Before Use
Swimming Pool Lift DEVICE i-swim2 MODEL PRELIMINARY OPERATIONS BEFORE USE ALWAYS FOLLOW THE SPECIFIC INTERNAL SAFETY PROCEDURES ISSUED BY THE USER. IN THE DESCRIPTION OF THIS CHAPTER THE REFERENCE NUMBER OF THE DEVICES ARE REFERRED TO THE PREVIOUS CHAPTER 9.2. -
Page 26: Use Description
Swimming Pool Lift DEVICE i-swim2 MODEL USE DESCRIPTION AS REGARDS THE NOMENCLATURE OF THE LIFT PLEASE REFER TO CHAPTER 2.1 OF THIS MANUAL. The operator authorized to position the lift must place it at poolside. Block the rear wheels with brakes (1),... - Page 27 Swimming Pool Lift DEVICE i-swim2 MODEL From the control panel, with the lifting button, move the seat to the maximum height. From the control panel, with the rotation control, position the seat perpendicular to the pool side. With the lowering button, proceed to the lowering until the immersion in water.
- Page 28 MODEL For the raising from the pool, the user must proceed by reversing the operations described above. THE SEAT AS SUPPLIED BY AUTOLIFT SRL IS EQUIPPED WITH HOLES FOR WATER DRAINAGE MADE IN SUCH WAY NOT TO AFFECT ITS STRENGTH.
-
Page 29: Cleaning
Swimming Pool Lift DEVICE CLEANING i-swim2 MODEL The lift must be manually cleaned with a cloth moistened with mild detergent (such as multi-purpose sanitizing environmental Amuchina HACCP) and then rinsed off with a cloth moistened with water. DO NOT USE AGGRESSIVE DETERGENT. DO NOT USE WATER JETS OR HIGH PRESSURE MACHINE. -
Page 30: Maintenance
Swimming Pool Lift DEVICE MAINTENANCE i-swim2 MODEL ALL THE ORDINARY AND EXTRAORDINARY MAINTENANCE MUST BE CARRIED OUT BY PROPER SPECIALIZED TECHNICIANS (SEE CHAPTER 1.4) BEFORE CARRYING OUT ANY OPERATION ON ELECTRICAL PARTS AND MOVING PARTS ELECTRICALLY OPERATED, IT IS NECESSARY... -
Page 31: Battery Charge
Swimming Pool Lift DEVICE MAINTENANCE i-swim2 MODEL 11.1 BATTERY CHARGE The battery charge must be done in a suitable place with effective ventilation to ensure the evacuation of any possible formations and therefore leakage of hydrogen. IT IS TASK AND RESPONSIBILITY OF THE USER TO IDENTIFY THE AREA TO CHARGE THE BATTERIES. - Page 32 Swimming Pool Lift DEVICE MAINTENANCE i-swim2 MODEL ONLY USE THE BATTERY CHARGER EQUIPPED WITH THE LIFT. 11.1.1 USAGE: 1. Compatibility: CBJ Care, CBJ1, CBJ2, COBO, CHJ2 and CH01 2. Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use 3.
- Page 33 Swimming Pool Lift DEVICE MAINTENANCE i-swim2 MODEL 11.1.7 TRANSPORTATION The lithium ion batteries must be packed and transported according to applicable regulations . Always ask your local transportation provider how to handle the transportation of lithium ion batteries . 11.1.8 WARNINGS Li-Ion batteries differ from the lead acid technology as they have a built-in deep discharge protection .
-
Page 34: Periodical Inspection
DEFECTS OR DAMAGE MUST BE REPORTED TO THE MANUFACTURER AUTOLIFT SRL FOR APPROPRIATE ACTION. Page 34 of 40... -
Page 35: Demolition And Waste Disposal
Swimming Pool Lift DEMOLITION DEVICE i-swim2 AND WASTE DISPOSAL MODEL In the event of waste disposal of the machine, it is necessary to follow the procedures provided by the legislation in force. In general it is necessary to disassemble in order to obtain several groups of homogeneous materials. -
Page 36: Spare Parts
Upper pivot + bushings Inferior pivot + bushing Lifting arm Upper spacers Front pin + bushings Column Seat Armrest Footrest Seat belt Inferior casing Superior casing FOR A PARTICULAR PARTS OUT OF THIS LIST PLEASE CONTACT DIRECTLY AUTOLIFT SRL. Page 36 of 40... - Page 37 Swimming Pool Lift DEVICE SPARE PARTS i-swim2 MODEL Page 37 of 40...
-
Page 38: Attached Forms
Swimming Pool Lift DEVICE ATTACHED FORMS i-swim2 MODEL • FORM FOR SPARE PARTS REQUEST • PERIODICAL INSPECTION REGISTER Page 38 of 40... - Page 39 FORM FOR SPARE PARTS REQUEST From SPARE PARTS SERVICE Fax +39 (0)376 553728 CODE TABLE NR. DESCRIPTION Q.TY POSITION PRIORITY URGENT NORMAL SHIPMENT PAYMENT DESTINATION SIGNATURE DATE Page 39 of 40...
- Page 40 PERIODICAL INSPECTION REGISTER MODEL i-swim2 Serial Nr. TYPE OF CONTROL RESULT REMARKS INSPECTION DATE DATE OF NEXT INSPECTION PERFORMER OF INSPECTION SIGNATURE Page 40 of 40...
Need help?
Do you have a question about the I-Swim2 and is the answer not in the manual?
Questions and answers